Get Free Shipping on your order now! Don't miss out!

Pettit Inflatable Antifouling Boat Paint

$69.59Limited StockSee Product Details
Pettit Inflatable Boat Paint
Quantity
Only 4 left
1 qt contains 1 qt

This item is eligible for free shipping

Product Details

Pettit Inflatable Boat Paint is an easy-to-apply ablative antifouling paint with a smooth finish for better performance. With similar properties as Pettit Hydrocoat, this water-based bottom paint offers multiple season hull protection with minimal odor and quick cleanup using water.

Pettit has forumlated this paint to adhere to both soft and hard bottom inflatable boats. When properly applied, this paint will withstand frequent trailering, beaching and launching.

Info & Guides
Click LINKS tab for technical specifications.

Technical Information

  • Contains PTFE to reduce drag
  • Dries to an easily burnished slick film for maximum hull speed
  • Controlled wear rate of ablative marine bottom paints reduce coating buildup while the loading of cuprous oxide content combats marine growth in highly fouling waters
  • Hulls coated with Hydrocoat only require pressure washing upon haul out to remove growth and prepare the hull for recoating and launching.
  • Water-based, safe and complies with all air pollution VOC regulations

Reviews

Rating Snapshot

Select a row below to filter reviews.
3 reviews with 5 stars.
0 reviews with 4 stars.
0 reviews with 3 stars.
0 reviews with 2 stars.
1 review with 1 star.

Overall Rating

4.0

Review this Product

Select to rate the item with 1 star. This action will open submission form.
Select to rate the item with 2 stars. This action will open submission form.
Select to rate the item with 3 stars. This action will open submission form.
Select to rate the item with 4 stars. This action will open submission form.
Select to rate the item with 5 stars. This action will open submission form.
Adding a review will require a valid email for verification

Filter Reviews

1 to 4 of 4 Reviews
1 – 4 of 4 Reviews
Wakefield, RI
1 out of 5 stars.

I will never buy this paint again

3 years ago
After over 1 hour of stirring the paint there is still a blob of compound which will not mix with the rest of the can. This is the 15th year I have utilized this product and I can tell you I will never use it again.
Helpful?
Westport, Ma
5 out of 5 stars.

Great Product

3 years ago
I painted the boat twice. It covers very well, and the boat
Helpful?
New York, NY
5 out of 5 stars.

Easy to apply.

6 years ago
Based on prior experience product is effective for several years.
Helpful?
Essex, CT
5 out of 5 stars.

Worth every penny!!!

11 years ago
All you need to do is make sure the bottom is clean and dry before application. Brush on two coats and that's it! We keep our Avon in a large barnacle area in CT. Since I started using this paint we have no barnacle's at all. It really good stuff. At the end of last season we still had a lot of paint cover so this year we only put on one coat. The paint is expensive but worth every penny!!
Helpful?

Questions

1 - 6 of 6 Questions

Q: I wish to remove this bottm paint from areas above the waterline. What is the process to remove Pettit #1841 from the hypalon inflatible fabric WITHOUT damage to the fabric or the adhesive holding the fabric joints together? The bottom paint has been very preventing bottom growth even in 70+ degree ocean water. But was applied too high above the waterline where it rubs onto adjacent dingys / boats leaving black marks.

4 years ago
2 Answers

A: Sorry no experience with this specific issue. My only input would be that over time the paint comes off by itself under the water line so perhaps you could speed up that process by using a water hose or an extended light pressure hose? Or check with petit and/or the dinghy maker? Good luck.

4 years ago
Helpful?

Q: I currently have MDR on the bottom of the pontoons of my RIB. Can I apply a coat of this product over the MDR without any weird chemical reaction? Also, I know this stuff is for inflatables, but can I use it on gelcoat too??

10 years ago
2 Answers

A: I put 2 coats on my Avon (hypalon) inflatable in Dec. Did not put it back in the ocean until mid Feb; so it's only been back in the after about 6 weeks. So far it's been super---but time will tell.

10 years ago
Helpful?

Q: can I use this paint on alum.bottom as well as the PVC tubes of my inflatable ?

11 years ago
3 Answers

A: I haven't tried to use it on Aluminum. I gripped pretty well on the inflatable material. Surface prep would be the key for it gripping the smooth metal. The paint is soft so I wouldn't expect it to last on surfaces that rub the bottom. I wish you luck.

11 years ago
Helpful?

Q: Is this paint suitable for a 1991 Avon Rover Inflatable?

11 years ago
3 Answers

A: I used the paint on a 1995 Sea Range inflatable. The results were reasonable. I lightly sanded the existing coating with 120 grit sand paper. The results were OK but not great. The main problem was gradual delamination where the old coating was already weak. It did cut the leak rate by about 80%.

11 years ago
Helpful?

Q: What other materials will I need to apply this product, epoxy etc.?

11 years ago
2 Answers

A: All you need to do is make sure the bottom is clean and dry before application. Brush on two coats and that's it! We keep our Avon in a large barnacle area in CT. Since I started using this paint we have no barnacle's at all. It really good stuff. At the end of last season we still had a lot of paint cover so this year we only put on one coat. The paint is expensive but worth every penny!!

11 years ago
Helpful?

Q: DOES IT COME IN COLORS AND GALLONS? ALSO IF IT COMES IN WHITE, CAN YOU ADD PIGMENT TO IT? CAN I PAINT A COMPLETE WHITE WATER RAFT WITH IT? THANKS JOSH JOHNSON

12 years ago
0 Answers
Error