AFI
AFI 1000 Waterproof Wiper Motors
AFI 1000 Waterproof Wiper Motors
$230.37In StockSee Product Details
Options
Quantity
1 ea contains 1 ea
Login
By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
This item is eligible for free shipping
Product Details
AFI 1000 heavy duty waterproof wiper motors with your choice of 1.5 or 2.5 inch shaft and 80 or 110 degree pre-set wiper sweep. The AFI wiper housings are made from UV stabilized high-temperature, high-impact thermoplastics. The wiper runs on a 12 Volt heavy-duty motor with an anti-rotation drive shaft. The drive shaft is knurled and the arm drive nut is made of solid brass. Features adjustable right or left self parking.
Info & Guides
Technical Information
- Fully sealed waterproof housing made of UV stabilized high-temperature, high-impact thermoplastic
- Factory pre-set sweep of 80 or 110 degrees, can be adjusted to 45, 60, or 110 degrees
- Powers 18 inch x 18 inch arm/blade combinations at a sweep set of 80 degrees or less
- Powers 16 inch x 18 inch arm/blade combinations at a sweep set of 110 degrees or less
- 5/8 inch diameter shaft
- 1-1/2 or 2-1/2 inch shaft length
- 12 Volt heavy-duty motor with anti-rotation drive shaft
- Knurled drive shaft and solid brass arm drive nut
- Adjustable right or left self parking
- Coast to park
- Includes 5 amp fuse and holder
- RF shielded circuitry
- Maximum current draw: 5 Amps
- Compact size: 6-5/8 inches long x 3-3/8 inches wide x 2 inches high
- Weight: 1.75 lbs.
- Made in the U.S.A.
- 3 year warranty
Reviews
Filter Reviews
Rating
Locale
1 to 8 of 9 Reviews
1 – 8 of 9 Reviews
Most Recent
Woodinville, WA
5 out of 5 stars.
Excellent unit
9 years ago
With some disassembly/reassembly, the unit can be adjusted for 50, 65, 80, and 110 degree sweeps, as well as left or right hand return. Unit comes with instructions on how to do this.
Helpful?
Seattle, Wa
4 out of 5 stars.
drop in replacement
9 years ago
Drop in replacement for my boat, took about 25 min to wire and adjust swing and parking location. last motor lasted about 10 years from install date, with fairly heavy use.
Helpful?
ROCHESTER, MI
5 out of 5 stars.
Worked out great
10 years ago
Worked out great, watch the left or right park positions and be careful with the auto park switch that will move to park if you leave the power on.
Helpful?
Riverside, RI
1 out of 5 stars.
Not wateproof
11 years ago
I bought this in October 2011 to replace an original AFI unit that came with the boat (1993). Installation was pretty easy but the unit failed in fall 2013 due to water incursion.
Helpful?
west coast
1 out of 5 stars.
The AFi 1000
13 years ago
Whatever you do, do not buy this piece of junk, it's a total con.
Helpful?
new england
5 out of 5 stars.
10 years and going strong
13 years ago
This wiper motor came installed on my boat in 2001. It has been trouble free for over 10 years.
Helpful?
Olympia, WA
1 out of 5 stars.
Looks Good, Works Bad
15 years ago
I have a three year old, 24' Skagit Orca, fishing boat that came with three of these motors. So far two of the three have gone belly up and the third is close to dieing. They have all been very noisey from the start.
Helpful?
Florida
2 out of 5 stars.
Gear Fails
15 years ago
Plastic Gear will get damaged if wiper blade gets stuck with something. Auto park feature will damage gear. Manufacturer dose not sale replacement gears.
Helpful?
1 Ratings-Only Review
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 7 of 7 Questions
Q: I have to replace an AFI motor that looks exactly like these, but the product number is 36280. It has a 1-1/2 shaft and 80% would work. Will this 36180 model work?
4 years ago1 Answer
A: Yes.
4 years agoHelpful?
Q: AFI 1000 says it can be adjusted for different degree's of operation how difficult is this to do?
5 years ago2 Answers
A: The adjustment is really easy, remove the cover screws remove cover looking at the gear, there are 2 screws through the stainless ring ( flat head phillips ), there are also markings on the stainless ring to indicate sweep angle after removing the hex head screw for linkage and the 2 flat head screws in the stainless ring, simply rotate the stainless ring, the nylon gear will remain still, move ring to the desired position reassemble in reverse order of disassembly. The stainless ring is more of a flat disc by the way, it fits in the center of the nylon ring gear. The instructions included are easy enough to follow, I did use a 12v battery and some jumper wires to verify the sweep and park before installing .
5 years agoHelpful?
Q: Can you send ordered good to Thailand? I will order severals 5 wiper motors. 10 wiper blades, 10wiper arms. Then one box is better handling and save shipment charge . Can you send it one box?
6 years ago1 Answer
A: Hello, we can ship to Thailand. You would need to pre-pay for the order via Paypal or wire transfer. Please call our sales desk at 1-800-497-0010 to place the order. Thank you.
6 years agoHelpful?
Q: Is this wiper motor manufactured in USA or China?
8 years ago1 Answer
A: It says made in USA.
8 years agoHelpful?
Q: I have a 1996 Tiara Mid cabin Express..what sweep do the wiper motors have? Either 80 or 120.
8 years ago0 Answers
Q: I have 3 AFI windshield wipers on my boat. One shorted out and I'm going to replace it. It has three wires hooked to it. one Red one Black and one yellow. Starboard side works independently or put the switch to the other side all three work together. I want to put in three toggle switches and make each work independently. What is the wire that cones off the back of the wiper marked with a green dot do? It does not appear to be a ground. Why do I need a three pin switch?
9 years ago0 Answers
Q: is it a three wire set up ?
10 years ago0 Answers