Used this product to fix a small area of my wooden boat that was a little pinky. It was easy mix and worked well.

it worked out better than i expected, i thought it would be like bondo or plastic wood but its much tougher more adhesive and easier to put on, only issue was the mixing of both parts you need strong arms to get the 2 parts together

I would purchase again. Mixing wasn't a problem but more difficult than Bondo Wood Filler. Your product sets slower so you can apply over a longer period of time. Takes one pair of Nitrile gloves per mix. Large defects are another good place to use this.

Used it to fill a small void in an oar blade which will be covered in Dynel. Like other reviewers, I was dubious about the crumbly texture of the Resin. It mixed up fine though. Instructions indicated ""by hand"", which I came to understand was meant literally. Via gloved fingers and palms kneading the two equal parts together was child's play. The mix molded easily and equally easy to apply over the epoxy penetrated wood. Will be curious to ascertain its shelf life.

I only give this product 4 stars because it can be difficult to work with; however, it does perform exactly as it states. Regardless of how the product looks after you form it and after its cured, it does shape very easily.

Once I got by the fact that Part 2 was very dry and appeared to be old, and that the process of mixing the two parts together was a challenge, the performance of the putty was quite good. It has good adhesion qualities and sanded to a smooth and durable surface. If you have wood that has deteriorated including dry rot and want a product to fill and reshape it, this is for you.

I tried to use this product on dried and somewhat deteriorated teak interior, and would not stick to surface. I suspect I needed to use the penetrating expoxy as suggested in directions first.

Material is a little dry which makes it more difficult to mix than the usual hole filler but works fine when applied to screw holes. Easy to sand smooth

Product was very dry and crumbly. Could not be properly mixed or spread. Had to throw it away. (I've already complained to JD)

Great stuff for filling a rotten board - works very easy, like modeling clay,,,

At first was a bit hard to work with as it is rather crumbly - once you get it started, however it mixes great, sands wonderfully, and takes paint like it is real wood.

At first I thought it was too dry and difficult to work with but I followed the instruction warning not to add anything to it. A second application made for a very nice job .

Overall I like the product. My only reservation is that it seems a bit dry (trouble knifing it out without it pulling the opposite side) during application. I recently bought this so it's not old on my shelf but it is possible it's a batch manufactured last year. Aside from that the product works as expected. 5 stars if the dryness is not the usual.