Camp Streamlined Shaft Zincs SAE

This goes on my 1"" bronze shaft, Easy to install one every year. Saves fastenings from electrolysis.

These 1 1/2"" zincs attach to the propeller shafts on a 36 foot trawler hull cruising boat. Because of the design of the fasteners on the split halves (2 on each split line), they cost 2x as much to install by my diver. It would be better to have one fastener on each split line using a flat screw or Phillips screw head.

the fasteners are solid and the ZN's seem to degrade more evenly. They seem to last longer than some other brands

this is more than about zincs which is my 3rd year of using great price and do the job, when i ordered these zincs i also ordered some paint both arrived quickly BUT paint had leaked a tiny bit i called and spoke to person a very pleasant Gal she was very helpful She said she would check into the problem i explained that these things happen and i wanted to buy a small pint or so to finish the job she resoned that amount was n/a She sent a gallon a no charge. i bought items from Jamestown when they were in Jamestown R.I. they are pros. thank you.

Camp shaft and rudder zincs have a cast in place insert to improve conductivity. They work and perform exactly as they should. I've used them on my 26 Bertram since 1988. A light hammer tap is all I do to set shaft zinc while tightening mounting screws. Don't just crank down the screws. The hex head screws are small on the shaft zinc and easily broken. Snug zinc and lightly tap to set and re-snug screws. Perfect connection every time.

Cam-X0 Zincs (fit 1/2 inch shaft for a De-icer)were not tapered as shown in the picture. Came as a trapazoidal solids with a 1/2 inch bore.