Attwood
Attwood SpringLift Series Gas Springs
Attwood SpringLift Series Gas Springs
$26.28In StockSee Product Details
Options
ATT-SL31405 -- 7.5 inch extended/ 40 lbsATT-SL1205 -10 inch extended/20lbs Blade EndATT-SL2405 -15 inch extended/40lbs Blade EndATT-SL33605 -- 15 inch extended/ 60 lbsATT-SL36205 -- 17.2 inch extended/ 20 lbsATT-SL36905 -- 17.2 inch extended/ 90 lbsATT-SL34205 -- 20 inch extended/ 20 lbsATT-SL34305 -- 20 inch extended/ 30 lbsATT-SL34605 -- 20 inch extended/ 60 lbsATT-SL34905-5 -- 20 inch extended/ 90 lbs
Quantity
1 ea contains 1 ea
Login
By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
This item is eligible for free shipping
This item will require additional time to ship
Product Details
Attwood SpringLift gas springs are used to lift, hold, open, and lower hatches, covers, lids, and doors with smooth operation. They are designed for industrial use and can handle any marine application. SpringLift gas springs can be used on boats, RVs, campers, and anywhere else industrial strength gas springs are needed.
Tech Specs
| Item Number | Extended Length | Compressed Length | Stroke Length | Standard Output Force | End Fitting Type |
|---|---|---|---|---|---|
| ATT-SL34905 | 20 inches | 12 inches | 8 inches | 90 pounds | 10mm Socket-Composite |
| ATT-SL34205 | 20 inches | 12 inches | 8 inches | 20 pounds | 10mm Socket-Composite |
| ATT-SL34305 | 20 inches | 12 inches | 8 inches | 30 pounds | 10mm Socket-Composite |
| ATT-SL34605 | 20 inches | 12 inches | 8 inches | 60 pounds | 10mm Socket-Composite |
| ATT-SL36205 | 17.2 inches | 10.2 inches | 7 inches | 20 pounds | 10mm Socket-Composite |
| ATT-SL36905 | 17.2 inches | 10.2 inches | 7 inches | 90 pounds | 10mm Socket-Composite |
| ATT-SL1205 | 10 inches | 7 inches | 3 inches | 20 pounds | 10mm Diameter Blade |
| ATT-SL2405 | 15 inches | 9.5 inches | 5.5 inches | 40 pounds | 10mm Diameter Blade |
| ATT-SL33605 | 15 inches | 9.5 inches | 5.5 inches | 60 pounds | 10mm Socket-Composite |
| ATT-SL31405 | 7.5 inches | 5.25 inches | 2.25 inches | 40 pounds | 10mm Socket-Composite |
Info & Guides
WARNING: These products may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Reviews
Filter Reviews
Rating
Locale
1 to 10 of 33 Reviews
1 – 10 of 33 Reviews
Most Recent
Houston TX
3 out of 5 stars.
Ends were wrong
3 years ago
I made the mistake of looking at picture instead of description. Part had the wrong ends. Considering there was $10 shipping to me and another $10 to ship back it didn't make sense returning a $20 item. This is where Amazon orders are superior. Returns are FREE. Live and learn....
Helpful?
Jamestown, VA
5 out of 5 stars.
Fit perfectly!
4 years ago
Worked perfectly. Replacing a 20 year old on my pontoon boat I am refurbishing.
Helpful?
Lake Havasu, AZ
5 out of 5 stars.
I would buy this product again
4 years ago
I used this to replace a weak strut on my anchor locker. It fit perfectly, even though the part numbers didn't match. The only complaint: the shipping cost almost as much as the part.
Helpful?
Hughes Springs, TX
3 out of 5 stars.
yes
5 years ago
so far the product is ok. my order was wrong and has not been corrected
Helpful?
Huntington Beach CA
5 out of 5 stars.
I would by again
5 years ago
Buying replacement part, numbers where different, called sales and they helped me get the correct size. Easy to install, works great. Arrived on time, only negative is the shipping charge was high.
Helpful?
Seattle, WA
1 out of 5 stars.
Sent me the wrong product
6 years ago
Would not make good. Sent some number to send back. When I asked what the number goes on you blew me off. I work in the yacht business and this is the worst service I have encountered in my career. Never again and I will make sure friends and associates do not get burned by you.
Helpful?
Northern Ohio
5 out of 5 stars.
just what I needed
6 years ago
The item was just as described and installed just as easy. Works great, hopefully it last as long as the last one.
Helpful?
Mississippi
4 out of 5 stars.
I would order this product again from these people.
6 years ago
I ordered these to replace the old ones in my Ranger bass boat. They fit perfectly and do the job I expected them too.
Helpful?
indiana 46131
1 out of 5 stars.
maybe and maybe nolt
7 years ago
I been waiting on these parts for about 3 weeks , And I still don't have them.
Helpful?
Tyler, Texas
5 out of 5 stars.
Gas shocks for Tractor hood.
8 years ago
Who would think there are hundreds of Gas spring shocks. Thank goodness I was able to find exactly what I was looking for. Now if I can just find time to install them before the warranty runs out.
Helpful?
1 – 10 of 33 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 94 Questions
Q: Looking for the SL36-70-1 SpringLift gas springs. 320N , 3613MA on current spring. Do you carry? If not, anything comparable? Thanks Bob
6 months ago2 Answers
A: Thank you for reaching out. The way that these work in the part number is: SL= Spring lift, 36= size range(Compressed and extended), 70= Pounds of pressure, these are the important parts of the part number. The closest we have is the SL36(same length)90-5 The pressure being 90, will make it a little tougher to compress but that is the only one we have that may work for you.
6 months agoHelpful?
Q: I am looking for a direct replacement for a spring lift SL16-35 for rv basement door.
a year ago1 Answer
A: Hey there. Unfortunately we do not carry a replacement for this spring.
a year agoHelpful?
Q: Hi, I need to replace SL36-50#. Which product do you recommend?
a year ago1 Answer
A: Hey there, thank you for reaching out. I would recommend sticking with it(there should also be a designation on there after the 50 IE SL36-50-5. The closest we have at 3620 and 3690, the 50/20/90 stands for the amount of pounds of pressure, so going too far off that pressure can make the hatch not work to your liking.
a year agoHelpful?
Q: I am looking for ATT-SL34905 (20"" 90Lb) gas struts but with blade/eye ends to replace the originals on hatch covers on a Taiwanese trawler. (M8 eyes maybe?)
2 years ago1 Answer
A: Sorry, just what you see on the list.
2 years agoHelpful?
Q: looking for equivalent Spring Lift 13 35
2 years ago3 Answers
A: I purchased some gas springs from Jamestown Distributors and am very pleased, I wasn't sure of the weight of what I was trying to balance was , so the first two I bought were not strong enough. The next two have done the job very well. They are used on the trunk lid of my 1995 Cushman Truckster
2 years agoHelpful?
Q: My rv outside access door Atwood strut indicates SL-14-60 it is a 12 by 20 strut. I see on the site a -1 or -5 number after the 60 number which do I need a -1 or -5? The door probably weighs about 20 lbs.
2 years ago1 Answer
A: ATT-SL34205 will be the closest the difference is the SL-14-60 has a 3/8"" end fitting and the ATT-SL34205 has a 10mm end fitting which is slightly larger but likely will fit.
2 years agoHelpful?
Q: I need 2 new lifts for my truck tool box lid. The old ones are shot and have the numbers SL 10 45 printed on them. They are 10 inches from center of ball socket hole to hole and 4 inches from center to the tube. Are these still available or what new model # would be the equivalent?
3 years ago1 Answer
A: SL stands for Spring Lift. They equivalent should be ATT-SL1205 -10 inch extended/20lbs Blade End
3 years agoHelpful?
Q: Hello I have an attwood springlift gas spring 8x19 20 inches and force 60 cylinder. I found on your site this reference ATT-SL34605 - 20 inch extended / 60 lbs does it correspond and my other question do you ship to France Thanks a lot
4 years ago1 Answer
A: Yes it can be shipped to France. Send an email to info@jamestowndistributors.com with your shipping information. One of our techs will verify if it matches and send you a quote.
4 years agoHelpful?
Q: Pick up Tool Box lid lift. The old one has the number 2831MT 0200N 062/00 A 21. Made by Attwood Corp., Lowell, Mi. 49331. What do i need to replace this.
4 years ago1 Answer
A: I believe it has 21lb pressure. You have to look at the specs on attwood site for one that has the same extended length and 21 lb pressure.
4 years agoHelpful?
Q: Currently, I have two ""Spring Lyfts"", model SL3-20 I believe. They're not keeping the master cabin bed (aft section) open when used. Exact number on the shaft is; 3506MZ 0100N 097/03. Which model strut replaces this one and should I go with a higher pressure one to ensure the locker opens easier and bed stays up while we're in the storage space?
4 years ago1 Answer
A: I always use the stronger ones when inam replacing unless you can find the EXACT one you are replacing and you love the lift and hold. Also spend the extra for SS. I am on the great lakes and still the regukara ones rust a bit. Can only imAgine a salty boat Michael E. Chesler The Carlisle Block Building c.1895 | Chillicothe, Ohio 2016 Winner: Best Commercial Rehabilitation in Ohio THE CHESLER GROUP, INC. | P.O. Box 23249 | Chagrin Falls, Ohio 44022< x-apple-data-detectors://1/1> Office:***.****< tel:(216)%20431-9100> | Direct:***.****< tel:(216)%20536-9700> www.cheslergroup.com< http://www.cheslergroup.com/> ?
4 years agoHelpful?
1 - 10 of 94 Questions