Options
Quantity
1 ea contains 1 ea
Login
By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
Product Details
King Starboard is the original marine-grade polymer and the industry standard. It is the product of a proprietary process called K-Stran, the most advanced manufacturing process available for producing consistently flat continuous sheets. King StarBoard is easy to work with using standard woodworking tools, and design changes are a snap.
In addition, the installed cost of King StarBoard is less than teak, other common marine woods, and fiberglass. Plus, our large sheet sizes maximize your yield. Boat buyers appreciate King StarBoard's low-maintenance finish. Repair and refinishing due to weathering and decay are eliminated, and cleaning is easy.
Info & Guides Features:
Technical Information
- Environmentally stabilized - withstands the harshest marine conditions
- Won't rot or discolor like teak and other solid woods
- Won't delaminate like wood laminates
- Easy to work with using standard woodworking tools
- Matte finish on both sides to hide scuffs and scratches
Recommended Products
Jamestown Distributors
#14 S/S Self Tappers Flat Head Phillips
Starting at $17.71
King Starboard
King Starboard 1/2"
Starting at $60.41
King Starboard
King Starboard 3/4"
Starting at $137.76
3M
3M Scotch-Weld DP8005 Acrylic Adhesive
Starting at $82.40
King Starboard
King Starboard Starlite XL
Starting at $80.88
Reviews
Filter Reviews
Rating
Locale
1 to 8 of 11 Reviews
1 – 8 of 11 Reviews
Most Recent
Mass.
4 out of 5 stars.
I'd use it again
5 years ago
I've not finished the project, but it lived up to all expectations, and I'm assuming it will accomplish the mission.
Helpful?
N.FL
1 out of 5 stars.
Unable to rate because I'm still waiting
7 years ago
a month later to receive my order. Sorry to say, because JTD has never let me down like this before, but here we are.
Helpful?
Erie, PA
5 out of 5 stars.
Worked as advertised
9 years ago
Material worked with wood working tools as advertised, and gave results I expected. I am happy with this product.
Helpful?
BETHLEHEM, PA
5 out of 5 stars.
Great product
10 years ago
I used the sheet material to make a cover over the outboard motor gas tank in the back of my sailboat which otherwise is totally exposed. Material is easy to cut, drill and generally work with and should last forever.
Helpful?
Waianae, HI
5 out of 5 stars.
large cooler bottom protection
11 years ago
Used as a bottom reinforcement for 120 quart cooler and being portable it provides a large cutting surface for cleaning fish.
Helpful?
enterprise, Alabama
5 out of 5 stars.
Just what i needed
12 years ago
replace a bait box lid and it worked great same color as my 20 year old boat.
Helpful?
Louisiana
4 out of 5 stars.
King Starboard
14 years ago
Can cut and trim like wood maybe easier. I used a knife to clean the edges. This worked better than sanding. First time I used this material. I see many uses for this stuff. Now I'm planning more projects in my head. Rebuilt the dashboard in my boat that someone butchered the cutouts on and looked messy. Now it looks new again.
Helpful?
me/vt
4 out of 5 stars.
Great stuff!
15 years ago
I love using this stuff, it works very much like wood, and it won't rot. [...] and it would be great if it was adhesive friendly, but these are small quibbles. I used it to overlay some interior paneling that had a lot of holes from old switches, etc, and it looks terrific.
Helpful?
3 Ratings-Only Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 17 Questions
Q: Can this be used as a spacer to reduce vibration on a trolling motor mounting bracket? Is there any flexibility in this material? Thanks, Terry
3 years ago1 Answer
A: You could cut a piece of this to use a spacer. There is very little flex in this product, it's quite rigid.
3 years agoHelpful?
Q: I'm thinking of replacing the floor board that cover the bilge in my sailboat. The board are approximately 2 x 4 feet. Could someone stand on 1/4 inch starboard without it bending? Curious to know how stiff this material is. Thanks!
4 years ago1 Answer
A: No, it would have to be reinforced. Starboard can be slippery when wet.
4 years agoHelpful?
Q: Could this product be used for the manufacturing of a live well for my boat? Thinking of using the 1/4"". Can this be bent to a 90 degree square angle? Thank you
8 years ago1 Answer
A: You can use Starboard, but it won't bend it is very hard and stiff.
8 years agoHelpful?
Q: Will King Starboard bond well to fiberglass by West System epoxy? Or, is the surface too smooth?
8 years ago3 Answers
A: I would be very hesitant to attempt to use any bonding agent I am familiar with to __quote__glue__quote__ Starboard to a surface. Possibly contacting the manufacturer may shed light into a compatable adhesive.
8 years agoHelpful?
Q: Can carpet be glue to Starboard?
10 years ago3 Answers
A: Yes, but the adhesive needs to be suitable for both the carpet and the starboard. You may also need to rough up the starboard surface in order to get adhesion.
10 years agoHelpful?
Q: Can I glue carpet to King Starboard?
10 years ago3 Answers
A: I am pretty sure you would need a special type of glue. Call the manufacturer and see what the rcommendation is.
10 years agoHelpful?
Q: What is the best jigsaw blade to cut starboard, and once cut can I sand the edge for a smooth or rounded look?
10 years ago8 Answers
A: I only had to make straight cuts I used a 80 tooth carbide tipped 10 inch radial saw blade. Block sanded edges to break the edge used 80 grit paper and 120 to finish
10 years agoHelpful?
Q: how do you glue it?
10 years ago2 Answers
A: Glue it down with 5200 marine sealent or a small amount of 2 part epoxy.
10 years agoHelpful?
Q: what is the weight of the 24x57in board?
11 years ago1 Answer
A: It will come in very close to 12 lbs.
11 years agoHelpful?
Q: Does this product come in light beige.? Tnx Michael
11 years ago5 Answers
A: The King StarBoard color Sanshade seems closest to light beige. Jamestown may have to special-order it
11 years agoHelpful?
1 - 10 of 17 Questions