TACO
TACO Hollow Back Stainless Steel Half Ovals
TACO Hollow Back Stainless Steel Half Ovals
$71.70Limited StockSee Product Details
Options
Quantity
Only 2 left
1 ea contains 1 ea
Login
By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
Product Details
Type 304 marine grade stainless buffed polished predrilled and countersunk hollow back ovals on 6-inch centers. Uses flat or oval head fasteners. The 1/2in sizes use #6 fasteners, the 3/4in sizes use #8 fasteners, the 1in and 1 1/4in sizes use #10 fasteners. Sold in 6 and 12 foot lengths only.
Any continuous 12 length must be shipped motor freight.
Recommended Products
TACO
TACO Universal Flex Trim
Starting at $73.18
TACO
TACO Metals Stainless Steel Rub Strake
Starting at $26.90
Jamestown Distributors
#8 S/S Wood Screws Flat Head Slotted
Starting at $14.84
Jamestown Distributors
#10 S/S Wood Screws Flat Head Slotted
Starting at $22.85
Jamestown Distributors
#6 S/S Wood Screws Oval Head Slotted
Starting at $9.44
Reviews
Filter Reviews
Rating
Locale
11 to 10 of 8 Reviews
Most Recent
4 Ratings-Only Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 14 Questions
Q: Taco 1"" hollow back rail u have 6ft and 12ft pieces I need 16 ft section for swim platform on 42"" egg harbor can lead me in a direction
3 years ago7 Answers
A: It depends on the dimensions of your platform but your best option would be to buy three of the 6' pieces, install a 6' length around each side and cut the third piece to fit between the other two. You could reach out to Taco marine at 800.653.8568 and ask if longer pieces are available and who sells it near you.
3 years agoHelpful?
Q: Will you please let me know the ID on the Taco half round 1/2"" & 3/4"" 304 ss rub rail ? Thank you
3 years ago1 Answer
A: Sorry, JD does not sell half round ss rub rail. The 1/2"" half oval is @ 5/32"" high when laid flat. The 3/4"" is @ 3/16"" high. The 1"" is @ 1/4"" high.
3 years agoHelpful?
Q: What is the shipping cost of a 6' X 3/4"" hollow back rub rail to area code 32080 Thank you
3 years ago1 Answer
A: please call the support center
3 years agoHelpful?
Q: DEAR SIR, CAN YOU GET ME 14 FT LIKE THIS WITH POINTED ENDS??? I CAN PICK IT UP WHEREVER YOU WANT ME TO IN SOUTHERN FLORIDA. TACO CO. DOESN'T WANT TO SELL TO ME DIRECT. HOPE YOU CAN HELP. THANKS AND BEST REGARDS, STAY SAFE..
4 years ago1 Answer
A: Sorry, JD does not carry such an item.
4 years agoHelpful?
Q: How come your Tech Specs don't have any Tech Specs? I'm looking for the inside radius.
5 years ago1 Answer
A: assuming you have it in stock, measure it.....what width is he asking about....that is essentially the inside radius
5 years agoHelpful?
Q: For a Kayak we don't need the durability or the weight of SS or brass, do they make these stripe in Nylon?
6 years ago2 Answers
A: We unfortunately do not have any lighter duty nylon rub rail materials. We do have some of the PVC inserts that usually fit in some of our other rub rail systems that would be more the scale you are looking for, but I'm not sure how you would attach it.
6 years agoHelpful?
Q: With the SS rub rails do you use splice and end caps. Did not see those items listed. Thank you,
6 years ago3 Answers
A: Hi Bill, here is a link to the end pieces. There are no splice fittings for this brand. https://www.jamestowndistributors.com/userportal/show_product.do?pid=219&familyName=TACO+Hollow+Back+Stainless+Steel+Rub+Rail+Ends
6 years agoHelpful?
Q: Can the 1/2 stock be bent around the stem of a small runabout? And, are there end pieces for the 1/2 stock. Thanks - Jim
7 years ago1 Answer
A: No you cannot bend hollow back without kinks, you would need to use the solid back to bend it.
6 years agoHelpful?
Q: Could a short piece of this material be suitably used as a keel guard on a 10' dory?
7 years ago1 Answer
A: Yes, that would work well.
7 years agoHelpful?
Q: What is the typical length of #6 screw used for the half inch oval?
12 years ago4 Answers
A: My choice for screw length to mount the half-round stainless strip depends on several factors so in my opinion there is no __quote__typical__quote__ screw length. Place the strip on the surface or edge that you're trying to protect. Then insert a screw of known length thru one of the mounting holes and measure how much protrudes above the half-round. This will give you a starting length, that is, how much length is needed before the screw sinks into the surface. Suppose you're mounting a 1/2__quote__ half-round on a flat surface: this length should come out about 1/2__quote__. Then consider what you're driving the screws into---if 1/2__quote__ wood, for example, an additional 1/4__quote__ or possibly 3/8__quote__ or so is all that can be used for a total length of 3/4__quote__ to 7/8__quote__. In no case should the screw length be long enough so the screw penetrates thru whatever you're mounting on----and keep in mind that there will be many screws holding the half-round in place and very little load on the assembly so there's no reason to use screws that penetrate more than 1/2__quote__ or so, in any case. If you're mounting onto a sharp corner or edge on a keel or stem then screw length will shorten depending on how sharp the corner is---in the extreme case the starting length could be essentially zero.
12 years agoHelpful?
1 - 10 of 14 Questions