Perko
Perko 0493 Intake Strainer Replacement Parts
Perko 0493 Intake Strainer Replacement Parts
$38.28In StockSee Product Details
Options
Quantity
1 kt contains 1 kt
Login
By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
This item is eligible for free shipping
This item will require additional time to ship
Product Details
Replacement parts for the Perko 0493-Series Intake Strainer. Select from an assortment of spares including rubber gaskets, hinged cover bolts, cover bolt kits, stainless steel baskets, and more.
Refer to the chart below to select the correct parts.
Tech Specs
| Perko Part Number | Description |
|---|---|
| PKO-0493DP499P | Brass tie rods with 4 nuts and washers |
| PKO-0493DP599L | Hinged cover bolts for size 4 & 5 strainers |
| PKO-0493DP599R | Rubber gasket sizes 4 & 5 |
| PKO-0493DP799R | Rubber gasket sizes 6 & 7 |
| PKO-0493DP999R | Rubber gasket sizes 8-10 |
| PKO-0493DP799L | Cover bolt kit for size 6 & 7 strainers |
| PKO-049300799E | Bronze cover with gasket |
| PKO-049300999C | Transparent cylinder |
| PKO-049300899D | Stainless steel basket size 8 |
| PKO-049300999D | Stainless steel basket size 9 |
Recommended Products
Reviews
Filter Reviews
Rating
Locale
1 to 1 of 1 Review
1 – 1 of 1 Review
Most Recent
Lititz, pa
5 out of 5 stars.
Bolt for strainer cover
5 years ago
It was relatively easy for a diy er to install. however no instructions was a con. Just make sure you order the right one which I didn't.
Helpful?
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 7 of 7 Questions
Q: Is there a replacement lid for a 2"" ergo sea strainer that has a valve and hose connection to flush the heat exchanger with fresh water?
a year ago1 Answer
A: Hey Dennis. Unfortunately we don't carry a part like this off the shelf. I have seen some custom adapters that can do it, but they're homemade parts. I recommend calling Perko directly to see if they've ever made anything like this. Their number is 305.621.7525.
a year agoHelpful?
Q: Hi. I'm looking for strainer baskets measuring 4 1/2 "" x 12 3/4"" excl handle What's your match? The strainers we have are bronze, but no brand marking, similar to Perko?. Only a big number 3 on them
2 years ago1 Answer
A: Sorry I don't have a strainer matching those dimensions.
2 years agoHelpful?
Q: I have a perko strainer. I think it is a 0493. I need the top cover gasket. It is rubber. ID=1-3/4"" OD= 2-3/8"" Can you assist?
2 years ago1 Answer
A: Hey CB thank you for reaching out. We do not carry them unfortunately, the only part I could find that matched that came with the cover itself as well. Sample part # Perko 049300799E
2 years agoHelpful?
Q: I HAVE 493/500 RAW WATER STRAINER I NEED NEW STAINLESS STEEL BASKET IT IS 310 MM LONG [12 INCHES ] AND 80 MM [3.1/8 ] ROUND PART NUMBER PRICE AND AVAIL PLEASE
2 years ago1 Answer
A: Sorry, JD does not carry that part.
2 years agoHelpful?
Q: My basket is 6 x 2 inches. Which basket do I order.
3 years ago1 Answer
A: Hi we are going to need the Intake Strainer model number to be sure we recommend the correct basket. Please email us at info@jamestowndistributors.com. The model number should be stamped on the product or on the sight glass.
2 years agoHelpful?
Q: I have an older 0493/500 Perko water strainer. I need to replace a hinged bronze bolt. I called Perko and asked how to replace the bolt. They didn't know. It doesn't appear to be held by a set screw or anything at the top cap of the strainer. Please advise, I like to know prior to ordering. Thanks in advance.
5 years ago4 Answers
A: I'm surprised you got that response from Perko. If yours is similar to mine, there's what is called ""roll pin"" that allows the cover to open and close. You need to use a punch that is slightly smaller in diameter than the opening where the roll pin fits and gently tap on the center punch with a hammer to drive it out. The roll pin will probably be pretty well seated, so it may take several taps with your hammer to break it loose. Then, you can continue pushing the old roll pin out with your punch. The punch MUST BE SMALLER IN DIAMETER THAN THE ROLL PIN HOLE in order to drive it out. Once the roll pin is broken loose, you might need to use a nail that is smaller in diameter than the roll pin hole in order to continue pushing the roll pin out, depending on how long your punch is. Don't push on the roll pin with the point of the nail. Grind it flat, otherwise you'll end up actually expanding the roll pin rather than driving it out. If you order a replacement kit, you'll get a new roll pin. At least I did. Hope this helps. Tom H.
5 years agoHelpful?
Q: For the 493-500 series Perko Sea Strainer, I need to replace the hinged bolts. I bought from my local distributor the 0493DP799L. These bolts are too short. Would like to know before ordering if the 0493DP599L hinged bolts are longer than the previous.
6 years ago1 Answer
A: Hi Carol, the 0493DP799L is specified for the 1-1/4"" sea strainer. I'm not sure what the actual lengths are, that information is not posted anywhere, but your part number from what we can see here would be 0493DP599L. 0493-500 is the model number that you have, and 99L is the specific hinged bolt part number.
6 years agoHelpful?