Interlux
Interlux InterProtect 2000E Epoxy Primer Kit
Interlux InterProtect 2000E Epoxy Primer Kit
$139.87Limited StockSee Product Details
Options
Quantity
Only 5 left
1 kt contains 1 kt
Login
By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
This item is eligible for free shipping
Product Details
InterProtect 2000E is a two-part epoxy designed to protect fiberglass boat hulls from water absorption and reduce the likelihood of gelcoat blisters. The fast drying formula touch dry in as little as 30 minutes based on the ambient temperature, with immersion in 8-24 hours.
Interlux's Micro-Plate formula creates an effective barrier against water permeation. You can use 2000E antifouling paint primer above and below the waterline as a universal primer for all surfaces. It is also an excellent priming coat for all metals and can be used as part of a no sand system.
Available in quart and gallons in 2 colors - Gray and White.
2.25 Gallon containers do not include 2001E Cure. Each 2.25 Gallon container requires the separate purchase of one INT-Y2001EG. For the proper mix ratio, combine 1 part curing agent with 3 parts barrier coat primer.
Tech Specs
| Theoretical coverage (Sq feet) | 135 sq ft/gal by airless spray; 240 sq ft/gal by brush |
|---|---|
| Number of coats | 1 to 5 |
| Substrates | Aluminum, Fiberglass, Steel |
| Application Method | Airless Spray, Brush, Conventional Spray * Roller |
Info & Guides Two-part epoxy water barrier with Micro-Plates
Up to two weeks is allowed between coats of 2000E
Now available in two colors, Gray and White
Fast drying, easy application
Sag resistance to insure the elimination of sags and runs during application
InterProtect Primer Features:
Technically, InterProtect Micro-Plates provide millions of overlapping microscopic plates that create a barrier similar to shingles on a roof. These overlapping Micro-Plates eliminate any direct path for water migration and also improve the sag resistance of the epoxy making application easier.
What is Gelcoat Blistering?
Osmosis is caused by a chemical reaction between water and unreacted substances remaining in the manufactured hull. Water breaches the exterior gelcoat and reacts with the chemical components creating acidic substances. These substances create pressure behind the gelcoat which causes blisters and eventually cracking. Once the gelcoat is breached in this manner, the underlying laminate is capable of absorbing water like a sponge.
Use the Interlux InterProtect system to treat and help prevent this serious problem.
This formula helps you calculate how much paint is necessary for wetted surface area (i.e. under antifoulant paint). Calculate surface area as follows: Wetted Surface Area (WSA) = LOA x Beam x 0.85, then divide the WSA by 60 when brushing/rollering or 45 when spraying to determine the number of gallons necessary to reach 10 mils. For complete hull coverage calculate total surface area to be covered, then follow the division step. |
Curing agent - WARNING: Cancer - www.P65Warnings.ca.gov
Base - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Recommended Products
TotalBoat
TotalBoat TotalProtect Epoxy Primer & Barrier Coat
Starting at $54.99
Interlux
Interlux Fiberglass Solvent Wash 202
Starting at $24.98
Interlux
Interlux InterProtect HS Epoxy Primer
Starting at $168.26
Interlux
Interlux Watertite Epoxy Filler
Starting at $54.58
Interlux
Interlux 2333N Reducing Solvent
Starting at $36.50
Reviews
Filter Reviews
Rating
Locale
11 to 35 of 40 Reviews
11 – 35 of 40 Reviews
Most Recent
Hainesport, NJ
5 out of 5 stars.
Easy to mix and roll
6 years ago
I used this on bare aluminum sanded with 80 grit paper. I applied it easily then was amazed at the hard, well-bonded coating. I then sanded with 220 grit the next morning and applied the finish paint.
Helpful?
tampa, fl
5 out of 5 stars.
good stuff
8 years ago
I prime and paint the aluminum pontoons on my boat every year to protect from Salt water. Good product.
Helpful?
Chapel Hill, NC
5 out of 5 stars.
Use this for wood racing boat bottom
9 years ago
Have used on a 50 year old Wayfarer sailboat and this product gives her good protection from moisture and sands well for a fast bottom.
Helpful?
Big Pine Key, Fl
5 out of 5 stars.
An excellent product!!
9 years ago
I used 2000e on a world cat that had been previously bottom painted. I soda blasted the bottom, then applied 2000e for an aesthetically pleasing look since I no longer want bottom paint on the boat. I've rolled it and sprayed it. It works well both ways, but if you have the option I would spray it, especially if you are doing large areas. This is a very durable product that dries quickly and sands nicely. FYI: I sanded it slick to attain better fuel mileage, but it didn't help the economy, so I would recommend applying it and letting it dry. Happy boating!
Helpful?
Australia
4 out of 5 stars.
Good
9 years ago
I had hundreds of small osmosis holes in a 30yo 8 metre fibre glass yacht hull. I took all old paint and anti foul off. Sanded. I cleaned hull and washed it every other day with clean water for a month. I let it dry for a month. I filled holes with interprotect. Sanded. Filled holes with interprotect. Sanded. Put on four or five coats of interprotect. Put on two coats of anti foul. When it came out eight months later hull was perfect. Now working on iron hull, starting in at two inches at bottom with rust.
Helpful?
CANON CITY , CO
4 out of 5 stars.
Nice stuff, easy coverage
10 years ago
Coating over epiglass on my blistered sailboat hull. I found this to go on easy. The grey over white coats and vice versa made full coverage easy. Tossed the roller covers and brushes after each coat. But acetone cleaned up other stuff well, probably could have saved a few brushes.
Helpful?
Annapolis, MD
1 out of 5 stars.
Not a fan
10 years ago
The product does its job. That said, after I finished my project, I found that other manufacturers have better products. Pettit and Sea Hawk both have products that claim to require 2-3 coats, whearas Interprotect 2000E requires 5-6. For my next job, I will try the alternatives.
Helpful?
ROSWELL, GA
5 out of 5 stars.
Great for coating, fairing, protecting
10 years ago
Used the Interlux 2002E to paint the bottom of a J/24 after significant blister repair. It is a 2 part epoxy based paint, so be sure to mix the paint very thoroughly prior to application. Also added N2333 reducer (10% by volume) to help the paint to flow. Used a 6"" foam roller to apply, but had to change out the roller regularly, to keep it from gumming up or falling apart. Be sure to roll it on thick and to get good coverage. I have found it is better to go slowly, with very gentle pressure to reduce orange peal and roller lines. Work with small amounts and be sure to get is rolled on evenly. We put 4 coats on the J/24 with 2 Gallons of 2002E. Final sanding for a smooth finish is required. Can be over coated with a compatible anti-fouling paint or finish epoxy paint.
Helpful?
Lake Champlain
5 out of 5 stars.
easy to apply
10 years ago
I used this to reseal the bottom of an old Seafarer 26. Wasn't sure if it had ever been done in the past. Bought two colors so I could see the different coats. Didn't need to do that, it drys flat and you can see the overcoats easily. Covers well, a little more than I expected. Stinky to work with, make sure to wear a respirator. Turn the cans over and let them sit for a while before you use them. There is a lot of heavy material in this paint, can be a chore to mix the base layer. Also hard to be sure about the mix if you aren't mixing the full gallon at once.
Helpful?
ROCHESTER, NY
4 out of 5 stars.
Interprotect 2000e
11 years ago
The white Interprotect 2000e rolls out smoother than the gray. Be sure to use the recommended thinner, start with a little thinner,test, add more if needed.
Helpful?
Syracuse, NY
5 out of 5 stars.
I would buy this product again and again
11 years ago
I am using this product to repair and prevent further osmosis blistering on my fiberglass sailboat.
Helpful?
Pa.
5 out of 5 stars.
Not just for hulls & under water
11 years ago
Great for treating aluminum prior to paint. sand first then wipe or blow off dust, etch, then 2 coats of interprotect thin first coat, using fingerprint test recoat full strenth,sand, coat with epoxy primecoat to creat a fairing surface. read instructions on recoat times.Great product! With Microplates!!!! Sounds like scrubbing bubbles!
Helpful?
Grosse Pointe, Mi
5 out of 5 stars.
Interprotect 2000
12 years ago
This was a second boat I applied Interprotect 2000 to. This one is 32' 1964 fibeglass sloop with blister problem. Ground the previous coats down to bare gelcoat during winter to let the hull dry. Applied 5 coats Interprotect 2000 alternating gray and white. Since the hull temperature was about 44 deg F, thinned the product up to 10% with 2333N solvent. Used 3/8"" nap roller. Had to sand most of the last coat off since the stipple (orange peel) was pronounced. After sanding overcoated with VC17 - we sail in ""sweet"" water - Great Lakes.
Helpful?
Tallahasse fl
1 out of 5 stars.
Don't use on deck
12 years ago
WE were advised to use this product on the deck since the prime coat did not cover crazing. the technical support said put perfection on top. LOOKED AWFUL. Next call to technical support said oh no never use perfection on top of inter protect. Must use prime coat. First tech said should never have used prime coat to cover crazing . Next call to tech support said I should have contacted tech support. Wish they would get story straight. Just spent 4 hours sanding (non) perfection off. I cannot recommend products or technical support. Don't know what to do with this mess now.
Helpful?
Ridgway pa
4 out of 5 stars.
Seems to work great
12 years ago
I used this to prime the bottom of my catalina 22 and the keel prior to applying bottom paint
Helpful?
Fort Smith, AR
5 out of 5 stars.
Great product
13 years ago
We used it for the primer coat on the bottom of our 27' S2 sailboat. Put three coats on. It covered very well, topcoated it with antifouling paint. We will use this again on our next boat project.
Helpful?
Poughkeepsie N.Y.
5 out of 5 stars.
A lot of work but worth it!
15 years ago
Used the gray and the white overlapping to insure good coating of surfaces. A lot of work but built up a nice protective barrier on boat bottom in four coats. I have a 20' center console and used two gallons (A half gallon a coat for 4 good coats).
Helpful?
North east
2 out of 5 stars.
Not easy to apply
15 years ago
It might work with spray application, but with a brush following instructions line by line, it produced inferior results.
Helpful?
Athens, GA
5 out of 5 stars.
Interprotect 2000
15 years ago
This is great primer for building layers. I used it during the restoration of a 13 Whaler. I used three coats on the bottom of a 1968 hull that was torn up. Good stuff>
Helpful?
Solomons, MD
5 out of 5 stars.
Good stuff
15 years ago
This is the stuff if you want to prevent osmotic blisters. I was very happy that I got 3 thick coats out of a gallon on a 17' skiff. Read the warning label - get a respirator, tvek suit, gloves etc... Read the directions carefully for bottom prep & application. There are precise (and different) windows for overcoating with itself and overcoating with the first coat of paint. These windows change with heat & humidity. There's also a pot life - so make sure you'll use what you mix before it goes bad.
Helpful?
Marietta,Pa.
4 out of 5 stars.
Good Stuff
15 years ago
Product works just as advertised. I am impressed with the finish on my Whaler. Well worth the effort. Sands nice and is tough as nails. Fumes are very strong and could knock you out! I used it outside and fumes came in the house, and could be smelled almost anywhere within site of the boat. Would recommend using a lot of ventilation and a good mask, when applying or sanding. Fumes aside, this is a great product and performs exactly like Interlux claimed. Follow the simple directions, do the prep, and it's fool proof.
Helpful?
Miami / FL
5 out of 5 stars.
Top Quality Product, Easy to use !!
16 years ago
I rolled 4 thick coats and then light sanded before applying Interlux VC Performance Epoxy. Fast dry, Sands easy couldn't be happier with the results!
Helpful?
Crystal River, Fl
5 out of 5 stars.
This product worked great,
16 years ago
I am restoring an old fiberglass sail boat;it had alot of small blisters.I striped,sanded,epoxied, and then applied five coates of INTREPROTECT 2000. I then applied anti-fouling.LOOKES LIKE A NEW BOAT.
Helpful?
Tillamook, OR
4 out of 5 stars.
My Can says...
16 years ago
My can says 5 hour recoat, upto 15 hours. After 15 hours you MUST sand. Not sure what the TWO WEEK recoat mentioned means...? Requires FOUR complete coats. It's alot of work and timing to get it right. BUT, once your done, your done. Vapors are toxic, I'm switching to FULL face mask. Change filters as soon as you can smell it! Believe me, it'll hit your lungs like a ton of bricks! I chose to persevere, big mistake.
Helpful?
Minnesota
5 out of 5 stars.
Easy to sand. Makes for a great finish.
17 years ago
A thick primer that sands easily to make a nice smooth finish before final painting. Added bonus of preventing blisters.
Helpful?
5 Ratings-Only Reviews
11 – 35 of 40 Reviews