TotalBoat FlexEpox Flexible Epoxy Adhesive

I didn't actually get this in my order, there was a snafu in warehouse and I had this product replaced with West System G-flex. It is a similar product and time was an issue, but I had just finished my previous supply of the FlexEpox and will order again in the future, it great stuff and does everything it says it does and I'm super satisfied with the results.

Container leaked in shipping but they replaced and still leaked in shipment

Glued a few pieces incorrectly and had to take apart. Not easy by any means. Epoxy some rugged.

I exclusively used this to put down the deck on my Higgins restoration.

Used this product to adhere spray rails on a 30 repco, the epoxy is a lot funnier than I expected, but it did cure well. If using in surfaces where this product can drip or run I suggest using a healthy amount of cabosil to thicken

I called to see if you recommended anything to thin it with. You told me there was nothing I could use to thin it. I wasn't real sloppy to use and It cleaned up well with gasoline. Also, it did well in cool weather. I'll bet it hardens up very quickly in hot weather, however.

I need something flexible and strong to fix flaws/damage in a custom molded expanding polyurethane foam seat insert for an open wheel race car. I bought this product to experiment on some test pieces of molded foam, and it works very well. Adhesion to the foam exceeds the foam's strength, flexibility and toughness is outstanding, and it can be applied to coarse weave fabric to bridge gaps and reinforce thin areas. It's a little too viscous for some applications, but manageable. The only other drawback is that gaffer or duct tape will not adhere well to the cured product (a racing seat insert is normally covered with gaffer tape as a final covering). This can be solved however, by applying the gaffer tape to a thin layer of the epoxy while still wet, which gives good adhesion once cured. Hopefully, this product will be back in stock by the time we have cooler weather (for longer working time), when I plan to do the actual repairs.

Fantastic adhesion i dripped some mixed product on the glass cover of the scale. The hardened drip would not scrap off Drips on the uprepared alumium had to be ground off to remove

Carbon fiber tips on kayak and canoe paddles made with FlexEpox are durable and chip resistant even in heavy use on the rocks. Highly recommend.

I was looking for something like traditional epoxy resin but with a little flex. Even though it's early, this product seems to be just what I needed.