TotalBoat Outdrive AF Antifouling Barnacle Barrier Spray

$41.99In StockSee Product Details

Home / Paints / Bottom Paint

TotalBoat Outdrive AF Antifouling Barnacle Barrier Spray

TotalBoat Outdrive AF Aerosol being sprayed on boat metals close up

TotalBoat

TotalBoat Outdrive AF Antifouling Barnacle Barrier Spray

$41.99In StockSee Product Details

Options

Quantity

1 ea contains 1 ea

This item is eligible for free shipping

Product Details Tech Specs Info & Guides Data Sheets

Product Details

TotalBoat Outdrive AF Antifouling Barnacle Barrier Aerosol Spray protects underwater metals on props, shafts, struts, trim tabs & thru-hulls with a unique, copper-free formula that won't cause galvanic corrosion, and that will provide maximum corrosion protection. It dries to a hard, smooth finish that self-cleans while the boat is in service, with a high zinc content that serves as a dependable barnacle barrier for a full season.

Suitable for use in fresh or saltwater. Apply to properly prepared metals, including bronze, brass, aluminum, stainless steel, cast iron, galvanized steel, and more. For use above and below the waterline.

Available in Black (flat finish) in a 12 oz. aerosol spray.

Tech Specs

Substrates	Properly prepared metals for underwater use: Bronze, brass, aluminum, stainless steel, cast iron, galvanized steel, and previously painted surfaces
Application Method	Aerosol spray.
Application Temperature	Between 40 and 90°F
Recommended Coats	2 or more
Dry Time to Overcoat	3 hrs @ 90°F, 6 hrs @ 70°F, 12 hrs @ 40°F
Dry Time to Launch	8 hrs @ 90°F, 16 hrs @ 70°F, 24 hrs @ 40°F
Cleanup	TotalBoat Dewaxer & Surface Prep or TotalBoat Special Brushing Thinner 100
Thinning	N/A
Coverage	15 sq. ft. @ proper application thickness (one can per outdrive, with 2-3 coats)
Primer for Aluminum Substrates	TotalBoat Aluminum Boat Barrier Coat
Primer for All Other Underwater Metals	TotalBoat TotalProtect Epoxy Barrier Coat Primer
Color	Black
Finish	Flat

Info & Guides

IMPORTANT! DO NOT PAINT ANY SACRIFICIAL ANODES OR ZINCS!

Technical Information

TotalBoat Outdrive AF Aerosol Features

Inhibits corrosion on underwater metals.
Adheres strongly to properly prepared metals including bronze, brass, aluminum, stainless steel, cast iron, galvanized steel, and more.
Contains a potent zinc biocide to keep cured surface smooth in service.
Fast-drying formula.
Can be applied in temperatures as low as 40°F.

WARNING: NOTICE! This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Data Sheets

Outdrive AF Aerosol Paint Technical Data

VIEW

Additional Outdrive AF Aerosol Information

VIEW

TotalBoat Antifouling Paint Selection Guide

VIEW

Reviews

Rating Snapshot

Select a row below to filter reviews.

8 reviews with 5 stars.

3 reviews with 4 stars.

0 reviews with 3 stars.

1 review with 2 stars.

3 reviews with 1 star.

Overall Rating

3.8

Review this Product

Select to rate the item with 1 star. This action will open submission form.

Select to rate the item with 2 stars. This action will open submission form.

Select to rate the item with 3 stars. This action will open submission form.

Select to rate the item with 4 stars. This action will open submission form.

Select to rate the item with 5 stars. This action will open submission form.

Adding a review will require a valid email for verification

Filter Reviews

1 to 10 of 15 Reviews

1 – 10 of 15 Reviews

Portsmouth RI

5 out of 5 stars.

I will purchase again

11 months ago

Outdrive antifouling paint. I used this over the barrier coat on my prop. The spray can was super easy to use. It allowed for multiple coats. Once dried it was a flat black - which looked great.

Helpful?

Traverse City, Michigan

4 out of 5 stars.

I would buy this again.

a year ago

We use this annually on our Saildrive lower unit. It works well in fresh water (Great Lakes). Goes on thin and dries fast -- so no build-up problems. It is also compatible with aluminum alloys, which many anti-fouling paints are not.

Helpful?

Marion, MA

5 out of 5 stars.

I would buy this product again

a year ago

I have used this on my sailboat propeller. It has kept the barnacles away and after a light sanding and respraying I am good for the next season on Buzzards Bay.

Helpful?

Framingham

5 out of 5 stars.

Easy to use

2 years ago

Went on well, will see how the prop looks in the fall.

Helpful?

Portsmouth RI

5 out of 5 stars.

Great paint

3 years ago

Used this paint on shafts and rudders. Nice black color, easy to use too. Hope it protects as good as it looks.

Helpful?

Hamptons New York

4 out of 5 stars.

Would buy again

3 years ago

Went on easily without drips and seemed to cover well

Helpful?

Narragansett, RI

1 out of 5 stars.

Will Never BUY again. Does Not spray (1 out of 3 cans work)

4 years ago

I purchased this product ( 2 cans) since I could not find the aquagaurd spray as I have good results with other jd products. The first can the nozzle exploded paint all over my hands as I just about got through half the can. JD was quick to send me a replacement received it in less than 24 hrs. Thanks, Tom C. ( as I am local) the 2 nd can work without issue. I went down yesterday to finish the running gear with the replacement can and it stopped spraying halfway through. Needless to say I am frustrated. I followed the directions shook it for 2 minutes. I set a timer.

Helpful?

Narragnsett, RI

1 out of 5 stars.

Will Never BUY again. Does Not spray

4 years ago

I purchased two cans of this to try since they no longer carry aqua guard. Being total boat product I was excited to try this. This first can I used the spray nozzle pretty much exploded on my covered my hands and covered them in paint. I quickly called them as my boat is going in soon and need just about 2 cans for my running gear. Tom C was awesome I got the next can in 24hrs.(as I am local) The other can worked fine of my first 2 I purchased no problems. Went down today to finish with the replacement can and it stopped spraying about qtr of the way through the can. I am down with this product, I have about 90 sprayed after 3 cans. And yes I followed the directions set a timer and shook it for 2 minutes. Please get aquardguard back. Thanks Jay

Helpful?

Shelton, CT

2 out of 5 stars.

I will try a different product next time

4 years ago

Not a good experience with this paint. I followed all instruction on the can and my outdrive looked great when completed. However it did not cover as described, I needed 2 cans and 4 coats for good coverage. The label said one can could cover a normal out-drive. Very poor coverage. Growth and barnacles were present as well at the end of the season. Not so when I have used Trilux33. Very disappointed in this product. Will not buy this again, will go back to Trilux33.

Helpful?

Webster, NY

5 out of 5 stars.

Price comparison was excellant

4 years ago

I have not yet used it as my boat is in storage for the winter. I plan on using the AF Paint on my out drive in the spring.

Helpful?

1 – 10 of 15 Reviews

Next Reviews

Questions

1 - 9 of 9 Questions

Q: I have an Highfield inflatable dinghy with an aluminum transom. Can this product be used for just the transom? I used a copper based bottom paint on the Hull.

a year ago

1 Answer

A: Thank you for reaching out. It can be.

a year ago

Helpful?

Q: Can this paint be used on my transducers?

2 years ago

4 Answers

A: Hey Scott. Thanks for reaching out. Most transducers should only be painted with water based paints, as something about the oil or solvent based ones can block the signal. I would not recommend this paint for that reason. If your transducers are not aluminum, you could try JD Select water-based antifouling paint.

2 years ago

Helpful?

Q: Can this be used on the brackets on My Suzuki 300Hp outboard? Can it be used on my trim tabs? If so is any primer required for any of the above?

2 years ago

5 Answers

A: The answer is yes, and yes. Prime it with TotalBoat aluminum barrier coat. Instructions for both products are located under the tech sheet tab on the web page.

2 years ago

Helpful?

Q: Best paint for registration numbers on boat

2 years ago

1 Answer

A: Registration numbers should not be painted. Use 3"" adhesive numbers.

2 years ago

Helpful?

Q: Apply directly to max prop ?

3 years ago

7 Answers

A: I am not using this spray to apply to stainless steel prop, but for the keel since my engine keel is partially submerged in the water

3 years ago

Helpful?

Q: I have an ePropulsion pod drive (https://www.epropulsion.com/pod-drive/). What kind of surface preparation is required?

3 years ago

2 Answers

A: clean slime and growth off and lightly sand

3 years ago

Helpful?

Q: Can I apply over Velox on my prop and saildrive?

3 years ago

1 Answer

A: JD has not tested it over Velox. Velox says not to apply over other antifouling paints, so it follows that the reverse is also true. It would be prudent to first remove Velox before repainting.

3 years ago

Helpful?

Q: Can this be applied over a transducer?

4 years ago

5 Answers

A: I never tried it on the transducer. I always buy a special paint for the transducer. It comes in a small container not much bigger than a fingernail polish bottle and it has a brush like a finger nail brush.This spray paint works great on my outdrive.

4 years ago

Helpful?

Q: Can I use Outdrive AF directly over Trilux 33 that is in good condition ?

5 years ago

2 Answers

A: That is what I am going to do. I am going to sand and clean the out drive first. Then prep it and paint it. John Lean In and Carry On!

5 years ago

Helpful?