WEST System 8002 Roller Cover

These rollers, paired with 3"" wide foam brushes (for ""tipping"") are the perfect way to apply Schooner varnish. Thin with 333 brushing liquid and apply thin coats for the perfect glassy finish without brush marks.

Good thing I bought extras. One fell apart on me. I've used them in the past with no problem.

I bought a qt of interlux Perfection on 8/3/20 and my professional painter said the date code is to old to use ! I would like a credit for my purchase

Held up nicely in my roll and tip application of Interlux Perfection. One roller cover per coat on my 28 foot fly bridge cruiser. Worked great with minimal stipple. Used for Epoxy Primekote, and Perfection.

These are the only foam rollers I've used with epoxy that didn't come apart at some point. I've tried others but with really disappointing results. Kinda pricey but confidence in the product, in this stage of a project, is worth a lot.

These work great. I bought the cheaper alternative and they're junk!

Successfully applied 5 layers of barrier coat using these, at an even 2 mils per layer. Ready for use right out of the package. No shedding, fuzzies, etc. Will definitely use again.

I'm in the process of building a 18 center console and as the headlines stated I have use these for years and they work great. I have only used these with epoxy and paint so I can't comment on the use with any other material.

I have bought scads of these roller covers. I cut them to size for a job. So far I have only used them for epoxy, but they work great. Since the foam is thin, it doesn't suck up too much epoxy. I also cut the sized rollers into arcs of one third each. I used them to smooth out the epoxy for a nice finish. Since the cardboard is really stiff, they don't fold over like a regular foam brush might.

An excellent roller for epoxy and varnish. Nice spread. Few bubbles. Less need for tipping.