Options
Quantity
1 ea contains 10 ft
Login
By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
This item is eligible for free shipping
Product Details
Shields Bilge Hoses are designed to be used with bilge pumps. All sizes have smooth mounting cuffs every 12-inches. They are flexible for easy installation and resistant to acid, detergents, oil, gasoline, diesel, fuel, and salt water. Corrugated white polyethylene bilge hose is formulated with the end user in mind.
Recommended Products
Rule Industries
Rule 3700 GPH Submersible Bilge Pumps
Starting at $248.65
Rule Industries
Rule-Mate Automatic Bilge Pumps
Starting at $78.85
Rule Industries
Rule 1500 GPH Submersible Bilge Pumps 1500 GPH
Starting at $119.09
Rule Industries
Rule 24 360 GPH Bilge Pump
Starting at $26.95
Murray
Murray 300 Series Stainless Steel Hose Clamps
Starting at $13.18
Reviews
Filter Reviews
Rating
Locale
1 to 6 of 9 Reviews
1 – 6 of 9 Reviews
Most Recent
Alsip Illinois
5 out of 5 stars.
I would highly recomend this product
10 years ago
able to route right off the reel it came on without the hose trying to recoil
Helpful?
NEW PORT RICHEY, FL
2 out of 5 stars.
Paid $55.00 to have $26.00 hose shipped.
11 years ago
The hose I ordered was exactly what I needed, but I paid $55.00 to have $26.00 worth of hose shipped rush, because I needed them in 6 days, took 8 days to arrive. When I ordered I was told 3 days. The hose would have worked great for me, but by arriving late I was unable to use it.
Helpful?
St Johnsbury, VT
5 out of 5 stars.
I will be buying more of this product
12 years ago
Fits the Attwood Tsunami 1200 GPH Bilge Pump. These Hoses are not easy to find. I am very greatful that JD had it!
Helpful?
Ohio
4 out of 5 stars.
Works well for an array of uses
15 years ago
I have used this hose for bilges on Boats as well as swiming pool pumps and seems to hold up very well.
Helpful?
hill country, texas
3 out of 5 stars.
Don't ""Set It and Forget It""
15 years ago
After about 10 years, the aging hose cracked at the cuff where it was clamped to the emergency bilge pump. I doubt any liquid had ever passed through it nor had it ever seen any sunlight. This sort of subtle failure could easily result in the loss of a boat. If you install this hose, best to check its condition annually.
Helpful?
Atl, GA
4 out of 5 stars.
Fits the bill
16 years ago
this product economically fits the bill for longer runs of tubing - very light and easy to install. Time will tell how durable it ends up being
Helpful?
3 Ratings-Only Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 9 of 9 Questions
Q: Can this hose be attached to a through hull below the water line
3 years ago4 Answers
A: I agree with Philip. It is intended for bilge pumps that discharge above the waterline.
3 years agoHelpful?
Q: Can you join 2 sections together with a tight seal?
6 years ago2 Answers
A: You can join 2 sections together with a hose-to-hose union fitting of the appropriate size and hose clamps.
6 years agoHelpful?
Q: Is this hose smooth bore?
7 years ago7 Answers
A: No, the hose for the most part has the corrugated feel on the inside and out, but every foot there is a smooth spot like you see in the photo for plumbing connections.
6 years agoHelpful?
Q: Is this hose sensitive to sunlight?
8 years ago1 Answer
A: It's typically used where the sun doesn't shine, so I can't say if it is uv inhibited or not.
8 years agoHelpful?
Q: how long is this hose?
10 years ago2 Answers
A: The hose is sold by the foot. Either remove the old hose and measure, or estimate the approximate route of the hose and add several feet for curves and routing. It always takes more hose than you think.
10 years agoHelpful?
Q: Is this hose suitable for self bailing cockpits and/or galley sinks?
10 years ago1 Answer
A: Yes.
10 years agoHelpful?
Q: if I order 10 feet of hose, does it come as one piece or in 10 one foot sections? ... thanks
12 years ago1 Answer
A: It will come as one 10 foot section.
12 years agoHelpful?
Q: do I match sizes of hoses and thru hull fittings by just using the same diameter? In other words, if the measurement on the thru hull fitting is 1 1/8__quote__ then I get the pump hose at 1 1/8__quote__ also. Want to get it right the first time I order.
12 years ago4 Answers
A: Correct. I believe that this hose is measured by the ID (inside diameter). If you order 1 1/8 hose that means it should fit over a 1 1/8 fitting.
12 years agoHelpful?
Q: Is there an adapter to go from rul-80 (1-1/8) to standard 1-1/4 plumbing fittings?
13 years ago1 Answer
A: This hose is intended as a bildge pump discharge hose and should be routed from a bildge pump discharge to a through hull fitting or grey water discharge above the warter line only, that is why it is so cheap. If you are connecting a sink to a thru hull fitting below the waterline you need to use a good quality hose such as bellowsflex that can be purchased a a local industrial hose distributor, It is wire wound which keeps it from collapsing plus it is tough and is not subject to bending or breaking. If you want to sink your boat use the cheaper hose but it is not designed to be used under the water line.
13 years agoHelpful?