TotalBoat
TotalBoat TotalTread Non-Skid Deck Paint
TotalBoat TotalTread Non-Skid Deck Paint
$49.99In StockSee Product Details
Options
Quantity
1 qt contains 1 qt
Login
By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
This item is eligible for free shipping
Product Details
TotalTread is a ready-mixed, slip-resistant polyurethane non-skid deck paint with unique Propyltex™ wax texturing agents. The rounded shape of Propyltex™ waxes provides optimum gloss control and is less abrasive compared to silica texturing agents found in most non-skid deck paints or additives.
Apply TotalTread by brush, roller, or spray equipment. You will love the grippy, but not abrasive, high-traction surface. Apply a second coat for even more grip.
Available in Quart and Gallon sizes in four colors: Sand Beige, Kingston Gray, and White (which match our TotalBoat Wet Edge Topside paint colors), and Light Gray, which is a lighter, less blue gray than Kingston Gray.
Tech Specs
| Specifications | TotalTread |
|---|---|
| Thinning (Brush/Roll Application) | Can be thinned 5-10% with TotalBoat Special Brushing Thinner 100, if needed. |
| Thinning (Spray Application) | Thin with TotalBoat Spray Thinner 101, typically 10-20%. Thinning percentage varies by sprayer type and conditions. |
| Cleanup | TotalBoat Special Brushing Thinner 100, TotalBoat Spray Thinner 101, or TotalBoat Dewaxer & Surface Prep |
| Primers | TotalBoat Topside Primer, TotalBoat 2-Part Epoxy Primer (Metals), TotalBoat TotalProtect (Fiberglass/Metals), TotalBoat Aluminum Boat Barrier Coat (Metals) |
| Application Temperature | 50-90°F |
| Application Relative Humidity (RH) | 0-90% |
| Recommended Number of Coats | 1-2 thin coats |
| Coverage | 250-300 sq. ft. per gallon |
Info & Guides
Most non-skid deck paints rely on a 'sand' silica additive to provide grip. While they are certainly effective at providing secure footing, they have a few drawbacks: Scrub your deck too hard and the additive can become visible, leaving unsightly dark specks. The shape of traditional additives doesn't bond well with the paint, and the finish doesn't last all that long.
Our TotalTread is formulated to address these issues. Instead of a hard irregular shaped silica grit agent, TotalTread's wax rubber spheres are shock absorbing to give the finish some elasticity. The paint sticks better, and the finish looks better longer. It's easier to clean and won't wear away from scrubbing. And, because it's still a 1 part finish, it's easy to apply.
IMPORTANT APPLICATION NOTE
TotalBoat TotalTread should be applied in thin coats. 1-2 thin coats are recommended, for best results.HOW TO RECOAT TOTALTREAD FOR MAINTENANCE PURPOSES
To apply maintenance coats of TotalTread after a few years of use/exposure, clean/dewax the surface and lightly scuff it with 220-grit or 320-grit sandpaper or a maroon Scotch-Brite pad. Scuffing will naturally knock some of the grit down. If it really needs to be sanded heavier, you'll be able to judge that as you're doing it. If anything, the grit usually wears down after a few years, making it a little easier to sand, but would require at least one, maybe two coats of TotalTread for a more true color and desired texture.
WARNING: This product can expose you to chemicals, including titanium dioxide and ethylbenzene, known to the State of California to cause cancer, as well as chemicals, including ethanol, known to the State of California to cause developmental toxicity. For more information, go to www.P65Warnings.ca.gov
Reviews
Filter Reviews
Rating
Locale
41 to 70 of 205 Reviews
41 – 70 of 205 Reviews
Most Recent
Marion MA
5 out of 5 stars.
Excellent results
2 years ago
Very easy to apply and the right amount of grip
Helpful?
SF
1 out of 5 stars.
Not light grey!
2 years ago
Brilliant product, im sure, but not light grey . Unusable, unreturnable.
Helpful?
La Verne, CA
5 out of 5 stars.
Great Product
2 years ago
Total Boat Total Tread/Non-Skid Tread Paint is very easy to use and applies with little effort. Drying time was quick and the finished result looks great.
Helpful?
Tennessee
2 out of 5 stars.
Color was blue supposed to be Gray
2 years ago
Took this to my local sherwin-Williams store and it took them about 1/2 hr and they got the color spot on just like what was on the can, Thanks to sherwin-williams,, when I called Jamestown tech support they wanted me to buy more paint from them and add black !! They screwed up and never offered to send me more product
Helpful?
Central Illinois
5 out of 5 stars.
Exactly what I needed
2 years ago
The texture built into the paint made the painting process easy and the final results perfect.
Helpful?
Medina MN
5 out of 5 stars.
Awesome Product
2 years ago
I used it to paint the inside of a 14' Lund fishing. Looks brand new,
Helpful?
Mass
5 out of 5 stars.
Total tred
2 years ago
I have used this several years in a row. I do it every year and it holds up very good..not happy the price went up 25.00 but it works great..also it would be great if Jamestown Distributors would open the store back up for customer convenience and get off the Covid wagon.
Helpful?
New Orleans, LA
3 out of 5 stars.
It's okay, but I would probably pick another product
3 years ago
It's very easy to apply and reapply. I noticed after 3 years the deck was getting slippery. I followed the instructions and scuffed it up, taped off and reapplied. it was as easy as the original coat. However, i don't feel it is quite grippy enough when wet. Also, if left alone for too long, it gets really dirty and requires significant scrubbing to get the darkening stains that form. The worst quality is how hot the deck gets, you have to wear shoes in direct sun. Can be brutal on the bare feet.
Helpful?
Arkansas
1 out of 5 stars.
Wouldn't buy
3 years ago
Ordered Kingston grey and it turned out a light grey, not what I ordered. Went on smooth textured really well small grain.
Helpful?
Virginia
3 out of 5 stars.
Dark Grey, not light grey
3 years ago
I like the performance of this paint, however it was labeled and marked as light gray not dark gray. It's actually a pretty dark gray. Has anyone had success mixing white topcoat with this to lighten?
Helpful?
Reno, NV
5 out of 5 stars.
Good stuff
3 years ago
Applys easily, has great coverage. Looks nice when finished.
Helpful?
Dania, FL
5 out of 5 stars.
Good Stuff
3 years ago
All paints look good when you apply them. This still looks good a year later. Recommended.
Helpful?
Hudson River Albany
5 out of 5 stars.
Will be buying every other year.
3 years ago
Some 5 years ago a family member slipped on our back yard shed's pressure treated wooden ramp. Broke her hip. Painted the ramp with floor paint with grit sand. Still too slippery. Bought Total Boat Non-Skid Deck Paint. No more slipping. After 2 full years, there were small spaces where the non-skid paint wore off the pressure treated wood. Sanded lightly & painted whole ramp again this afternoon (October 2021). Just ordered a second quart. Should hold me and the family in safety for the next six years. Would I recommend this to a friend? Yes. Dumb question.
Helpful?
Honea Path, Sc
5 out of 5 stars.
Excellent product
3 years ago
I applied this product to both plywood and previously primed aluminum. It's holding very well and providing a very good not skid surface.
Helpful?
Leesburg FL
4 out of 5 stars.
Good enough
3 years ago
Used 2 gallons on houseboat roof. Needed 2 coats. Could see through in spots
Helpful?
Detroit
5 out of 5 stars.
Paint works as advertised
3 years ago
This product is easy to apply and works well. I was even able to mix two colors to match the existing nonskid.
Helpful?
Knoxville, TN
5 out of 5 stars.
Great, Durable Product
3 years ago
This paint/coating is an ""easy to apply"" product that adds the right amount of grip to your decks. It is easy to clean with a bristle brush and wash down.
Helpful?
Newport, OR
4 out of 5 stars.
Shipping could be better
3 years ago
The product is great, but it was just thrown in the box without any padding. The can arrived with a dent in it.
Helpful?
Portage mi
4 out of 5 stars.
Non skid paint
3 years ago
It doesn't dry as fast as I thought it would, have to redo a couple of spots. Give it about a week to dry thoroughly!
Helpful?
Easley South Carolina
5 out of 5 stars.
Better than expected
3 years ago
Used to cover forward deck and gunnels where to boat builder had placed carpet over raw fiberglass ( no gel coat ). After removing carpet and glue residue and sanding used two coats of white total tread. Cured fast in the hot South Carolina sun ( temp in mid 80's). It is hard and durable I am very please with the results.
Helpful?
Iowa
5 out of 5 stars.
Great experience
3 years ago
This product was recommended by staff for the deck on my 67 swift. Great product expect longer dry times unless it's a ultra this coat brush is suggested would recommend again and again
Helpful?
Punta Gorda, FL
5 out of 5 stars.
Easy to work with and covers well!
3 years ago
This paint is similar to Interlux Interdeck, which I used previously. it is easy to work with and cover well. You can probably get by with one coat. I used to for added texture and to ensure a more even coverage. The grip is good, but it doesn't reduce surface temperature as well as Interlux paint did. Overall it is a good paint and priced better than most non skids.
Helpful?
Central Fla.
5 out of 5 stars.
Great product great service
3 years ago
Product arrived promptly with extra goodies (stir stix and mixing cups) which is a nice touch. The paint has performed as advertised, easy to use with good coverage.I would highly recommend this product.
Helpful?
Burleson, TX
5 out of 5 stars.
Solid paint
3 years ago
Goes down easily but will need two coats to cover well. Drying is a little slow but when dry it hold up well.
Helpful?
Long Beach
4 out of 5 stars.
Keep it stirred
3 years ago
TotalTread, on my first time using it, was very easy to use. My biggest concern was it staying within the tape lines and not creeping/bleeding under - it didn't. And I didn't make any concerted effort to push the tape lines down extra good. What I did encounter was as the pan would get low I would get globs of the floating traction balls. Soon as I filled up the pan, the globs stopped.
Helpful?
South Shore MA
5 out of 5 stars.
great for all kinds of uses
3 years ago
I have used this product on boats before but this time I used it in our outdoor shower for better grip. Went on great, dried evenly and looks great!
Helpful?
Boston, MA
5 out of 5 stars.
Yes, Fantastic. Incredible finish
3 years ago
I bought the tan and white and added the white to lighten the tan til I got the color to match the boat perfectly. After one application the deck looks beauitful and it is durable and non-skid perfectly. Very happy with all the Totral Boat products. I have been working on boats for over 50 years now and these are the best products I've used yet. Thank you, Vinnie Camerlengo
Helpful?
Dunstable, MA
3 out of 5 stars.
Easy to use but long dry time.
3 years ago
I used this product to paint the plywood cockpit sole in a 1987 Marshall Sanderling, catboat. The texturing additive stayed evenly distributed in the paint while applying. It did not settle to the bottom of the paint tray as other non-skid products I have used behaved. The downside, and partly my fault, was the 72 hour dry time. I applied the product in a cool 60->65 degrees fahrenheit two car garage under my house, with a high humidity. 24 hours after applying I opened both garage doors and had 3 fans moving warmer, dryer air into the garage and it still took 72 hours to dry. I have used other paints many times in the past that have dried in similar conditions within 24 to 36 hours.
Helpful?
Wyoming
1 out of 5 stars.
Quite possibly the worst product I have ever used.
3 years ago
Quite possibly the worst product I have ever used. Applied 3 thin coats. 3 weeks later it has the consistency of wet chaulk. Ordered ""Kingston grey"" and got baby blue. Now I have 100+ hours of sanding to remove this baby blue wet chaulk/grease. Contacted customer service and was sent another gallon. Very hesitant to use it after this debacle. Huge waste of time/money and I regret not using a different product to do it right the first time. Luckily I stopped short of doing the entire boat and only did half the boat. Probably could have boat hydro turf for the entire boat for less money by the time I am finished with this. Irreversible damage done to boat to remove this.
Helpful?
East Hampton, CT
5 out of 5 stars.
Great Product
3 years ago
Rolled out easy and helped to make my decks start to look nice.
Helpful?
41 – 70 of 205 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 205 Questions
Q: null Would Total Tread be suitable and durable for a new residential concrete garage floor? Or, alternatively, another Total Boat coating product?
6 months ago2 Answers
A: No it is not suitable I put it on the sole of a dingy and it showed where after one year. You need an epoxy paint Yahoo Mail: Search, Organize, Conquer
6 months agoHelpful?
Q: null You say TB tread should not have standing water on it. What happens to the Product when it has water on it for more than 24hrs? Discoloration? Peeling?
7 months ago1 Answer
A: Hey there, Thank you for reaching out. It can vary but mainly discoloration and blistering from prolonged consistent exposure to moisture. It's not guaranteed to have issues but over time under that condition it can cause those issues.
7 months agoHelpful?
Q: null Perhaps a silly question but I painted one coat of Total Tread light gray on several sections of the deck but would prefer it to be even lighter so would you recommend mixing some white T Tread with the gray to achieve this?
7 months ago1 Answer
A: Thank you for reaching out. That would be the best way to do it, you could also add the Wet Edge in the Flat White version.
7 months agoHelpful?
Q: null can it be sprayed
9 months ago1 Answer
A: It can! Please see spray instructions on page 4 here: https://www.totalboat.com/cdn/shop/files/totalboat-totaltread-tds-2.8.22_6dbf964a-ed7b-4c45-9ec5-ae6e9c4de319.pdf?v=4738000835998146847
9 months agoHelpful?
Q: null is TotalBoat TotalTread Non-Skid Deck Paint good for pontoon floor?
9 months ago1 Answer
A: Thank you for reaching out. It can be used on fiberglass pontoon floors, for aluminum pontoons, the metal would have to be primed with our Aluminum Boat Barrier coat.
9 months agoHelpful?
Q: null Wondering if this would be a good choice for a houseboat top that is gel coat? If so any specific steps to make it adhere?
10 months ago1 Answer
A: Hey there, Thank you for reaching out. It would be, Follow the prep for fiberglass surfaces on the instruction sheet here: https://www.totalboat.com/cdn/shop/files/totalboat-totaltread-tds-2.8.22_6dbf964a-ed7b-4c45-9ec5-ae6e9c4de319.pdf?v=4738000835998146847
10 months agoHelpful?
Q: null Are sample color swatches available?
10 months ago1 Answer
A: We have a color chart for the Wet Edge Topside paint, which includes the same white, sand beige, kingston grey, and light grey that TotalTread comes in. Please note, with TotalTread, these colors are not gloss.
10 months agoHelpful?
Q: null I'd like more of a course grit do you have an additive we can use?
a year ago1 Answer
A: We have Soft Sand that you can add in a course grit, here's the link: https://www.jamestowndistributors.com/product/product-detail/336334
a year agoHelpful?
Q: null Is it possible to get a small size of the Total Boat Total Tread Non skid deck paint? I am trying to match up the color on an existing deck. I think it is light gray. Can I get a smaller size than a quart?
a year ago1 Answer
A: Hey there. Thanks for reaching out. Unfortunately TotalTread's smallest size is a quart.
a year agoHelpful?
Q: null My fiberglass boat deck was painted several years ago with Petit Easypoxy with a nonskid ingredient added. Could I paint Total Tread on this surface without a primer?
a year ago1 Answer
A: Hey Kevin, Thank you for reaching out. You can do that as long as the paint is in good condition, just prep per previously painted surfaces in the instructions
a year agoHelpful?
1 - 10 of 205 Questions