Shields
Shieldsflex II Marine Water and Exhaust Hose
Shieldsflex II Marine Water and Exhaust Hose
$133.31In StockSee Product Details
Options
SHI-250-0124 -- 1/2 inch ID x 12 ft LSHI-250-0584 -- 5/8 inch ID x 12 ft LSHI-250-0344 -- 3/4 inch ID x 12 ft LSHI-250-0340 -- 3/4 inch ID x 10 ft LSHI-250-0784 -- 7/8 inch ID x 12 ft LSHI-250-1004 -- 1 inch ID x 12 ft LSHI-250-1000 -- 1 inch ID x 10 ft LSHI-250-1184 -- 1-1/8 inch ID x 12 ft LSHI-250-1144 -- 1-1/4 inch ID x 12 ft LSHI-250-1140 -- 1-1/4 inch ID x 50 ft LSHI-250-1384 -- 1-3/8 inch ID x 12.5 ft LSHI-250-1124 -- 1-1/2 inch ID x 12 ft LSHI-250-1120 -- 1-1/2 inch ID x 10 ft LSHI-250-1584 -- 1-5/8 inch ID x 12 ft LSHI-250-1344 -- 1-3/4 inch ID x 12 ft LSHI-250-1784 -- 1-7/8 inch ID x 12 ft LSHI-250-2004 -- 2 inch ID x 12 ft LSHI-250-2144 -- 2-1/4 inch ID x 12 ft LSHI-250-2384 -- 2-3/8 inch ID x 12 ft LSHI-250-2124 -- 2-1/2 inch ID x 12 ft LSHI-250-2584 -- 2-5/8 inch ID x 12 ft LSHI-250-2784 -- 2-7/8 inch ID x 12 ft LSHI-250-3004 -- 3 inch ID x 12 ft LSHI-250-3184 -- 3-1/8 inch ID x 12 ft LSHI-250-3124 -- 3-1/2 inch ID x 12 ft LSHI-250-4004 -- 4 inch ID x 12 ft LSHI-250-4124 -- 4-1/2 inch ID x 12.5 ft L
Quantity
1 rl contains 12 ft
Login
By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
This item is eligible for free shipping
Product Details
Shieldsflex II Series Marine Water and Exhaust Hose can be used on engine intakes, wet exhaust connections where bends or longer lengths are required, bilge pump intake and discharge, scupper lines, toilets, and holding tanks.
Shieldsflex II features a black synthetic rubber tube and cover. Wire is used to reinforce the hose between plies of synthetic cord. These hoses are resistant to odors, permeation, abrasion, exhaust fumes, ozone, mild chemicals, antifreeze, and saltwater.
Available in various lengths of 10', 12' and 50' depending on diameter size. Please click the "Product Info" tab for a detailed list. Please call for specific lengths and requests.
Recommended Products
Murray
Murray 300 Series Stainless Steel Hose Clamps
Starting at $13.18
Groco
Groco Pipe-to-Hose Straight - Standard Flow - Bronze, NPT
Starting at $8.12
Vetus
Vetus Exhaust Hose
Starting at $1,029.63
Trident
Stainless Steel T-Bolt Clamps
Starting at $16.64
Groco
Groco Bronze Thru-Hull Fittings
Starting at $16.26
Reviews
Filter Reviews
Rating
Locale
1 to 10 of 18 Reviews
1 – 10 of 18 Reviews
Most Recent
Dighton, MA
5 out of 5 stars.
Very good quality/price
a year ago
Very good replacement. More flexible pipe, easier to install. Good quality 10/10.
Helpful?
Springfield La
5 out of 5 stars.
Great product
3 years ago
Used on fresh water intake to sea strainer to pump worked great
Helpful?
Folsom, CA
4 out of 5 stars.
Excellent Product - shipping cost too high
7 years ago
Decided to replace all the fresh water lined on my 1985 MasterCraft Stars & Stripes. This is a quality product; now I don't have to replace them for another 33 years.... :-). $22 shipping charge was a little on the high side, that why I only gave the transaction 4 stars
Helpful?
Kansas City
5 out of 5 stars.
PERFECT!
9 years ago
Yes! This is exactly what we needed and Jamestown Distributors offered best price, delivered fast! Amazing, wonderful experience.. couldn't be happier with the product or the service.
Helpful?
Ohio
5 out of 5 stars.
Great Product
9 years ago
Great product. Just what I needed. Easy to cut to length and install.
Helpful?
saint charles, il
5 out of 5 stars.
Great engine hose
10 years ago
Use as engine cooling water intake and water distribution.
Helpful?
Huntsville, AL
5 out of 5 stars.
Love the blue stripe
10 years ago
I am repowering a 21' Scarab with 530 HP 496 stroker. This ShieldsFlex hose is the only hose I'll use for the raw water system. This hose is not cheap, but it won't kink or collapse and it'll accept a pretty tight radius for 1-1/4"" wire core hose. Plus the blue strip compliments the translucent blue valve covers on the engine! I'm fastening the hose runs with Anchor SS Cushion clamps for a clean and robust installation. The fuel and oil lines are all stainless braid with AN fittings.
Helpful?
Pt Charlotte FL
5 out of 5 stars.
great product
11 years ago
Great heavy duty product that is flexible enough to easily replace the old one. Fast reasonable shipping.
Helpful?
MN
5 out of 5 stars.
The best there is
13 years ago
I used this product to replace an intake house on my Malibu inboard, between the V-drive and the raw water impeller. The old hose was nearly compromised as it was rubbing against the rudder assembly. But this stuff is strong, with the steel reinforcing, yet bendable enough that I was able to use a couple heavy-duty zip ties to keep the new hose from the same fate. Excellent product!
Helpful?
Ohio
5 out of 5 stars.
Highest Quality Material
14 years ago
The Schieldsflex II Marine Water and Exhaust hose is really a top notch product. I would put it up against any other brand for more than twice the price. Be sure to measure carefully, as there is no strech to the diameter of the tubing. Great value.
Helpful?
1 – 10 of 18 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 26 Questions
Q: Can this be used in salt water?
a year ago1 Answer
A: yes
a year agoHelpful?
Q: Is Trident VHT Series 90 Degree Elbow Exhaust Fittings TRC-TRL390SS -- 3 inch Compatible with Shieldsflex II exhaust CHI-250-2124 — 2 1/2 inch?
2 years ago1 Answer
A: No. The ID should be the same as the ehaust hose and the connection made with a tubing connector
2 years agoHelpful?
Q: What I meant to ask was whether I can get a continuous length of Shieldsflex IIhose (for instance, three 6' pieces arriving as a single 18' length) or only the increments shown. Also, the lengths shown as available after a search do not match those shown as available when one tries to order. For instance, for 1-1/8"" hose the search engine shows 4 or 5 different lengths, but the order selection offers only 6' and nothing else.
5 years ago1 Answer
A: I don't know, but they can answer all your questions directly, I'm sure.
5 years agoHelpful?
Q: Can I get Shieldsflex II hose, 1"", in lengths longer than 6'?
5 years ago1 Answer
A: Yes, All of the available sizes are listed under the product info tab.
5 years agoHelpful?
Q: What is the minimal length for the 250-1140 1-1/4'' wet exhaust/water hose? I only need 2'
5 years ago1 Answer
A: 6' is the shortest length JD carries.
5 years agoHelpful?
Q: I need 3 feet of 1inch ID pick up hose for my raw water pump that will bend and not collapse. what would that be?
6 years ago1 Answer
A: Shortest we have is a 6 ft length.
6 years agoHelpful?
Q: I have a marine shields wet/exhuast hose that is marked 3 1/2 on outside - is this really the ID of the hose?
7 years ago1 Answer
A: Yes
7 years agoHelpful?
Q: I am trying to locate a 1 inch ID hose for the live well drain on a Travler Boat. Do You have it?
8 years ago1 Answer
A: Jamestown carries a wide variety of hose products to suit many, if not all, marine applications. They can definitely provide hose for your application.
8 years agoHelpful?
Q: What is the temperature rating on the 4__quote__ exhaust hose?
8 years ago4 Answers
A: max temp shorty duration...250 degrees F.
8 years agoHelpful?
Q: what is the best way to cut this hose to size ?
8 years ago2 Answers
A: Robert U's procedure is absolutely correct.
8 years agoHelpful?
1 - 10 of 26 Questions