Bodi Econo Line Epoxy Rollers

Great smaller diameter roller. basic design but fully functional, and easy to clean.

Worked well, remember to rinse out well with acetone. and it can be disassembled.

Makes it a breeze to lay up the fiber glass cloth.

it might be a base model but works correctly, what more can be said

This roller fit my nooks and crannies perfectly. I'm reinforcing a couple of fiberglass bumpers for my race car and this did the job.

I'm repairing both port and starboard gun rails on my boat.

New to Fiber-glassing, this helps alot. Great little tool to get the glass rolled out and all the air bubbles out. Makes even a beginners project look like it was done by a pro.

Was exactly what I needed for a town chock full of boats and no local supplier for repair products. A great company to buy those much needed supplies from with great prices and great service! Thank You!

Does the job when removing air bubbles from between layers of fiberglass fabric. Use smaller width rollers for tighter/compound inside corners. When rolling layers on a tight inside curve, it helps to use a wide-bladed putty knife (as wide or wider than roller) to follow the roller into the corner and hold the fabric while you roll the other surface. Clean well immediately after use, or the resin will build up in the grooves. The metal construction helps chip out some of this buildup, but it is not easy.

I like the aluminum rollers because they have a little more heft than the plastic. The plastic rollers work fine also- just a matter of preference. All are well made and not expensive. They are easy to clean with solvent and do the job. Grooved rollers are best for working the resin into the fabric and for removing any air bubbles.