Shields White Sanitation VAC Heavy Duty Hose

$22.94In StockSee Product Details

Home / Plumbing / Hose and Hose Clamps

Shields

Shields White Sanitation VAC Heavy Duty Hose

$22.94In StockSee Product Details

Options

Quantity

1 ea contains 10 ft

This item is eligible for free shipping
This item will require additional time to ship

Product Details

Shields Vac Extra Heavy Duty/FDA White multi purpose, extra heavy, smooth walled, vinyl hose for boat and marine sanitation systems. Excellent for critical bilge, drain, scupper line, and potable water fill applications.

FDA approved, with low water absorption compounds that resist odor permeation and toilet chemicals. Reinforced with hard vinyl helix. Various internal diameters available. The most widely used hose for all toilet output systems is the 1-1/2 inch inside diameter hose since it has a 4 inch bend radius and 28 VAC rating.

NOTE: Do not use glycol based antifreeze in hose. Do not use in pressurized water systems.

All sizes sold in 10' lengths with a maximum continuous length of 50'.

Reviews

Rating Snapshot

Select a row below to filter reviews.

6 reviews with 5 stars.

1 review with 4 stars.

0 reviews with 3 stars.

0 reviews with 2 stars.

0 reviews with 1 star.

Overall Rating

4.9

Review this Product

Select to rate the item with 1 star. This action will open submission form.

Select to rate the item with 2 stars. This action will open submission form.

Select to rate the item with 3 stars. This action will open submission form.

Select to rate the item with 4 stars. This action will open submission form.

Select to rate the item with 5 stars. This action will open submission form.

Adding a review will require a valid email for verification

Filter Reviews

11 to 10 of 7 Reviews

1 Ratings-Only Review

Questions

1 - 10 of 12 Questions

Q: We have the shields vac xhd series 148 in our boat, I need to put a few elbows in to make the connection to the toilet work but I cant find any fittings that will work? I believe ours is the 1' 1/2 inch inside diameter...I have went to every store in our area and have been able to find nothing that will work...basically need a either couple 90's or a few 45's

5 months ago

2 Answers

A: Please reach out to the support center with some photos so we can better understand your question. You can email them to info@jamestowndistributors.com

5 months ago

Helpful?

Q: Hi, I was wondering if you do custom cuts for this hose? I only need 13 ft so wanted to ask before buying two 10 ft sections. Thank you! Suzanne

2 years ago

1 Answer

A: Hi Suzanne, unfortunately, all of our marine hose is sold in standard lengths. There are other retailers with storefronts who will cut hose for you. Thanks!

2 years ago

Helpful?

Q: what sealing compound are you referring to?

3 years ago

2 Answers

A: I didn't use any sealing compound I just used hose clamps and have not had any problems.

3 years ago

Helpful?

Q: would this hose work well for the scupper drain that discharges just above the waterline?

3 years ago

1 Answer

A: yes

3 years ago

Helpful?

Q: What is the minimum bend radius of 1"" Shields sanitation hose?

3 years ago

2 Answers

A: It has a 4"" bend radius which I believe (if memory serves correctly) is an ABYC standard.

3 years ago

Helpful?

Q: why is the 3/4"" shields hose almost double the price of 1"" hose?

4 years ago

1 Answer

A: It is based on how much JD has to pay for that item and the volume purchased.

4 years ago

Helpful?

Q: Shields White Sanitation VAC Heavy Duty Hose appears mispriced. The price of 10 ft of 3/4 inch ID is the same as 10 ft of 1 1/2 inch ID. ~=$40. Is this correct?

6 years ago

2 Answers

A: The pricing is $41.80 for the 3/4"" and $28.58 for the 1 1/2"" 10 ft lengths.

6 years ago

Helpful?

Q: What is the OD of the 1-1/8""?

6 years ago

1 Answer

A: OD is a little over 1 3/8""

6 years ago

Helpful?

Q: Is the shields sanitation hose oil resistant? I want to use it for oil suction hose.

8 years ago

3 Answers

A: I only used it for Sanitation holding tank, I do not know if oil resistant however they say can be used in bilge. It is smooth and rigid, I sealed it with goop as I did not like the way it did not snug down on the fittings, my feeling is it would be too rigid for a vacume line that you might want to bend and flex. the shield flex water exhaust hose my work better

8 years ago

Helpful?

Q: I want to use this on a water pump. The pressure will bar around 70 pounds. Can this hose handle this kind of pressure?

9 years ago

2 Answers

A: for 1/2quote or 3/4quote dia, cold, I would guess no problem but I've never tried it

9 years ago

Helpful?

1 - 10 of 12 Questions

Next Questions