Home / Paints / Varnish

Epifanes High-Gloss Clear Varnish

$22.15In StockSee Product Details

Home / Paints / Varnish

Epifanes

Epifanes High-Gloss Clear Varnish

$22.15In StockSee Product Details

Options

Quantity

1 ea contains 1 ea

This item is eligible for free shipping

Product Details Info & Guides

Product Details

Epifanes high-gloss clear varnish is renowned for its high-gloss finish and offers superior protection in all climates, making this perfect for use on boats, outdoor furniture, and any exterior wood projects. Formulated with tung oil, phenolic and alkyd resins, and U.V. filters for superior protection. This marine spar varnish is an exceptional finish for wood above the waterline, or over traditional clear urethane and clear epoxy resins systems. Apply with a foam or bristle brush for best results.

Need the complete set-up? Our new JD Epifanes Clear Gloss Kit (CVKIT) includes two 1000ml cans of varnish, 2 foam brushes, 2 paint strainers, 2 stir sticks, and 2 plastic paint pails. This is a great value. You save on the varnish and receive brushes, strainers, and pails for free!

Info & Guides

Technical Specifications

Container Size: 250 ml., 500 ml.,1000 ml., 5000 ml.
Color:Clear Amber
Gloss: Ultra High Gloss
Density: 0.92 kg./liter
Solids Content : 55 +/- 2 vol. %
Drying times at 65F / 65% RH: Tack free - 3 hours / Tape free - 24 hours Dry - 12 hours / Recoatable - 24 hours
Recommended Film Thickness: Per coat wet - 50 micron / Per coat dry - 30 micron
Application: Brush, roller, conventional air spray, HVLP

Temperatures should be between 50 degrees F and 85 degrees F for application, with air humidity below 85 percent. Avoid varnishing in too much sun or wind, a rapid loss of solvents will occur under these conditions and will decrease the flowing ability. Epifanes Clear Gloss Varnish is compatible with most other types of one-component alkyd or urethane based varnishes and over two-component varnishes.

Technical Information

What's included in JD Epifanes Clear Gloss Kit (CVKIT)

2 containers of CV1000 (2000 ml of varnish)
2 foam brushes
2 cups
2 strainers
2 stir sticks

SAFETY INFORMATION

Be sure to read all safety information on the label and in the SDS (safety data sheet) before using this product. Keep out of reach of children. Keep away from heat, sparks, open flames, and hot surfaces. No smoking. Do not breathe dust, fumes, gas, mist, vapors, or spray. Use only outdoors or in a well-ventilated area. Wear protective gloves, protective clothing, eye protection, face protection, and a proper respirator.

Reviews

Rating Snapshot

Select a row below to filter reviews.

143 reviews with 5 stars.

20 reviews with 4 stars.

5 reviews with 3 stars.

4 reviews with 2 stars.

5 reviews with 1 star.

Overall Rating

4.6

Review this Product

Select to rate the item with 1 star. This action will open submission form.

Select to rate the item with 2 stars. This action will open submission form.

Select to rate the item with 3 stars. This action will open submission form.

Select to rate the item with 4 stars. This action will open submission form.

Select to rate the item with 5 stars. This action will open submission form.

Adding a review will require a valid email for verification

Filter Reviews

101 to 130 of 177 Reviews

101 – 130 of 177 Reviews

PERU, NY

5 out of 5 stars.

Varnish best, JD customer service better

11 years ago

The varnish doesn't get much better than this unless you cut it yourself. Bought this for a project and screwed up the order so didn't get to take advantage of the special JD was running at the time(my mistake, not JD's). Melanie at customer service was a trooper and got me the special despite my ignorance. Tough to eat crow and have the distributor be nice to you at the same time. They have my business.

Helpful?

Kettering, Oh

5 out of 5 stars.

Great Product

11 years ago

I used 2 quarts to do the project in the pics. The first 2 coats took double the time the can says to set up, because of the fresh cpes. I used to seal the new Marine grade plywood. The work was not done in a controlled environment but turned out pretty nice due to the quality of the product. I highly recommend Epifanes Clear Gloss Varnish.

Helpful?

North Central FL

5 out of 5 stars.

Epifanes Gloss Clear Varnish - great!

11 years ago

All places my boats (10) have wood.

Helpful?

Corinth, MS

4 out of 5 stars.

Spectacular gloss

11 years ago

My boat's teak trim has never looked better. Epiphanes' high gloss is the best I've seen, and I've used most of the well-known brands...Captain's, Flagship, and Bristol Finish among them. I applied six coats of Epiphanes Wood Finish overlaid by two coats of Epiphanes gloss varnish, and the results are excellent. No judgment yet on longevity (that's why I rated it 4 stars instead of 5), but other owners in my marina have used Epiphanes and say good things about it.

Helpful?

Kettering, Oh

5 out of 5 stars.

Time Will Tell

11 years ago

The varnish goes on nice over CPES. The first coat or two took longer to set up because of the epoxy. After that it sets up nice and smooth, but its hard to review its performance regarding longevity. It does seem to be a popular varnish that others have had success with.

Helpful?

Mishawaka, Indiana

4 out of 5 stars.

will use this on all my outdoor projects

11 years ago

I sprayed Epifanes Gloss Clear Varnish on a teardrop trailer(all wood exterior),I loved the way it went on and looks, have gotten many good comments. I will use this on all my trailers and other outdoor projects.

Helpful?

Corinth, MS

4 out of 5 stars.

High gloss, great look

11 years ago

Superior gloss to any varnish I've used...including Captain's, Flagship, and Bristol Finish. The jury's still out on longevity but others have told me it's pretty good. Lays on easily and smoothly and self-levels well. Sensitive to over-brushing, especially in warm weather.

Helpful?

Pelham, NY

4 out of 5 stars.

Excellent varnish

12 years ago

Went on beautifully. A bit thick but I thinned it with mineral spirits which did not change the finish at all. Very good varnish based upon my initial application. Cannot vouch for how long it will last.

Helpful?

Adams Basin, NY

5 out of 5 stars.

Great Varnish

12 years ago

I use this varnish on all of my wood and canvas boats and canoes as well as my all wood canoes. The finish is always perfect

Helpful?

Oak Ridge, NJ

5 out of 5 stars.

Long lasting exterior coating

12 years ago

I refinished 20 year old oak Adirondack chairs with two part epoxy followed by Epiphane varnish. Every spring I wash the chairs with soap and water. After 5 years they still look the same as when they were refinished.

Helpful?

Mocksville, NC

4 out of 5 stars.

Great Product, problems with shipping

12 years ago

The box was far too light for shipping and both cans of the product were damaged and open. Salvaged about 90% of the varnish.

Helpful?

Laredo, texas

5 out of 5 stars.

Outdoor mahogany's best friend

12 years ago

I made Adirondack chairs out of mahogany but don't like that ""beautiful weathered grey"" look that happens when left out in sun and rain. Two years after using epifanes those chairs are the same deep red color as the day the varnish was applied.

Helpful?

Indianapolis, IN

5 out of 5 stars.

Best Varnish for maximum UV protection

12 years ago

I have applied this finish both by rolling and spraying. I have a home built cedar strip canoe that has been stored mostly outdoors and the Epiphanes Gloss Varnish has lasted for 10 years. It is now time to restore the finish and I fully expect it to last another 10 years. Thanks for a great product.

Helpful?

New milford NJ

4 out of 5 stars.

High quality finish for brightwork

12 years ago

I prefer slightly thinned and to avoid runs ,don't load up brush especially on vertical surfaces, IE apply very sparingly, lightly sand with fine paper after thoroughly dried and recoat for 3 coats minimum

Helpful?

South Bay

5 out of 5 stars.

long life

12 years ago

While reading up on how tos for vanishing my boats teak, I discovered how hard it is to care for finished bright work. From the every day wiping down dew before the morning sun dries it to re-varnishing every six months, and the worst, cover your boat with some blue canvas fitted to snap over everything , basically hide all that beautiful work that you have done so you never get to look at it or have people drool over your boat as they walk by. Through a recommendation I chose Epifanes. A year an a half and it looks exactly the same. I have never once gone out in the early morning to dry off dew or sanded it down for a re-coat. It has held up to everything I have put it through. As a beginner I have a few minor regrets on the changes I have made to my boat, using this product is one of my best decisions.

Helpful?

Bigfork, MT

5 out of 5 stars.

Nothing better

12 years ago

There is no better varnish than Epiphanes. Also, though it is expensive, it pays off in the long run both in wear and workability. JD has the best price on this product I have seen by a long shot.

Helpful?

Ithaca, NY

5 out of 5 stars.

quality items in Kit

12 years ago

Just wanted to say JD is doing right! Even the pails and foam brushes are quality items and made in USA... The Varnish is made in Holland and is some of the best you can buy at any price.

Helpful?

batonrouge la

5 out of 5 stars.

I would highly recommend this product

13 years ago

this product does the job quickly and professional results

Helpful?

Lincoln, RI

5 out of 5 stars.

Great deal

13 years ago

I use this varnish on the small amt of brightwork that is inside of the cabin and on the exterior of my Seasprite 23. I use about five coats to give a deep glossy finish. I'm not to picky so I get away using a chip brush or a foam brush. This was a deal I couldn't pass up after I had already purchased the same varnish form a competing company at a much higher price. JD usually delivers to me in one day.

Helpful?

Largo, Florida

5 out of 5 stars.

Best Flowing of all I've Used

13 years ago

I'm on year 3 after doing a Tayana 48. If anyone knows how much teak is on a Tayana, between 48ft of 10inch cap rails, swim platform, cockpit, etc. you will more than get the picture. After 5 coats, I did top it off with 2 coats of Bristol Finish for hardness. It looks the same as it did when I finished her, 2&1/2 years later. Even in the hot Florida sun. The owner has been out cruising along the Gulf Coast and is always asked what he used for the finish. So he calls me to remind him of what I put on. Tremendous gloss and the shear amount of finished teak is what gets noticed. I liked its flow properties during application.

Helpful?

Barrington, RI

5 out of 5 stars.

2-can kit is great!

13 years ago

I'm not a professional woodworker, so I wasn't sure how much varnish I needed for the small assorted teak parts on my boat. After deciding to get a second can ""just in case"" I noticed this new 2-can kit, which includes some necessary sundries to do some standard varnish work. It's cheaper than buying (2) cans separately, plus you get some ""free"" goods out of the deal. This was a no-brainer!

Helpful?

Wisconsin

5 out of 5 stars.

Great on Cedar Garage Doors

13 years ago

I roll a couple of coats onto my garage doors every summer for 5 years! I tried to skip a year - won't do that again - but if you keep it up - nothing works better and the doors are in full sun.

Helpful?

Boonville,CA

5 out of 5 stars.

Flowed on smoothly unblemished finish.

13 years ago

Used it to finish a log section end table. It flowed on smoothly and left a very nice shiny finish.

Helpful?

Paso Robles, CA

4 out of 5 stars.

Beautiful shine

13 years ago

I gave it a 4 because the first time I used it, I applied at full strength and it only last two years and then cracked and turned ugly. This time I started with 50/50 mixture (50% thinner) and gradually increased it on each application to 70/30, 80/20 for the finished coat. I also upgraded the brush to professional and it appears to have made a hugh difference in smoothness and final finish. I wet sanded with 800 sandpaper between each coat. Now, we'll see how long it last, however, it does look like glass now.

Helpful?

Savona, NY

4 out of 5 stars.

Excellent Gloss - Epiphanes Clear

13 years ago

Very clear - little amber color. Levels out fairly good. Watch air temp and humidity. Do not go back over after you have moved on to another area. Drags very quick after laying down. Has a plasticy feel but looks good.

Helpful?

Milton, Florida

5 out of 5 stars.

Like the product, not the related cost

14 years ago

So I am very happy and satisfied with the product,[...]

Helpful?

New Mexico

4 out of 5 stars.

So far so good

14 years ago

I am using this to refinish the neck of an 80's era electric bass that was finished at the factory with a conversion varnish. Adhesion is good, the coats sand off VERY nicely. Too early to tell but all indications are that I made the right choice with Epifanes.

Helpful?

Denham Springs, LA

5 out of 5 stars.

the best

14 years ago

Best UV protection of any varnish I have used. Follow recommendations on thinning and don't try to apply too thick of a coat at one time

Helpful?

Danville, Indiana

5 out of 5 stars.

UV protection

14 years ago

This product was recommended by a highly recognizable west coast furnature builder. This product is being used on a wooden west facing church cross in the midwest. The UV protection is a must.

Helpful?

Michigan

1 out of 5 stars.

Hazmat fee? Why Now?

14 years ago

Why the hazmat charge for plain old varnish. I can see for industrial solvent lacquers....will purchase the product from a local shop next time!

Helpful?

101 – 130 of 177 Reviews

Questions

1 - 10 of 175 Questions

Q: How much coverage on 250 ml. I have a 3' wide, 3' long bow needs a couple coats to fresh it up the mahogany?

8 months ago

2 Answers

A: One 250ml can will cover @35 sq ft with one coat.

8 months ago

Helpful?

Q: i am planning to use this on a mohogany door 1) will it bring out the color 2) protect 3) how much will I need to cover 36x 80 both sides properly

8 months ago

1 Answer

A: I find that it gives mahogany a rich beautiful color. No need to stain the wood. The best way to get longevity out of CV is to build up at least 7 coats, then do regular maintenance coats to refresh the top layers that are bearing the brunt of the UV damage. A 1000ml can will cover @150 sq ft with one coat. Check out this link vor the tech sheet: https://www.epifanes.com/related/375cab1e-12c0-4cbe-a6bc-47553f259588.pdf

8 months ago

Helpful?

Q: What is a good thinner for this finish ?

11 months ago

1 Answer

A: Epifanes offers two thinners, one is for brushing and one is for spraying. Check out this link: https://www.jamestowndistributors.com/product/product-detail/877

11 months ago

Helpful?

Q: hi, is there a way to reduce the water marks on peeled varnish (other than deep sanding) before refinishing with new varnish? Thanks in advance Van

a year ago

1 Answer

A: Unfortunately, there is no easy fix for that. Remove the varnish, clean the wood with a two part teak cleaner, sand with 220 and recoat. To prevent varnish from flaking, apply 10 to 12 coats to start, and reapply regular maintenance coats once or twice a year.

a year ago

Helpful?

Q: Hello, I'm restoring an antique Triumph with a wood dash. I've applied a waterfall bubinga veneer and looking for the best way to finish it. The bubinga has beautiful grain and I don't want to darken it, but I do want high gloss and of course good UV protection. I'm fine with multiple coats and long drying time. What would you suggest? Thanks! Don

a year ago

1 Answer

A: The Epifanes clear high gloss varnish will darken it a little but the grain will still be visible and highlighted with the high gloss. It will provide good UV protection.

a year ago

Helpful?

Q: Is this varnish ok for interior surfaces on a boat?

a year ago

2 Answers

A: Yes, Epifanes Clear High Gloss varnish can be used both inside and outside.

a year ago

Helpful?

Q: Planning to refinish mahogany front door what stains are compatible with the ephianies spar varnish?

a year ago

1 Answer

A: Mine all peeled off

a year ago

Helpful?

Q: Hello! I am currently building and finishing a wooden bar top for my back porch and looking at this product (Epiphases Gloss). The top has been coated with a gel stain. Is this product compatible with that finish? If not, can you recommend a marine product with built in UV inhibitors? Thanks, Jeff

a year ago

3 Answers

A: I would imagine that if can still feel the grain of the wood, the Epifanes would be fine. It has a nice gloss finish that I have to touch up every couple of years. Hope this helps. Peace ?? On Monday, July 10, 2023, Jamestown Distributors <

a year ago

Helpful?

Q: I cannot locate my order number for epfines high gloss varnish ordered 7/3 r thereabouts. DO you have one on record for me - eugene chiappetta? eugenechiappetta@sbcglobal.net? My mailing address is 7 Petral Rd, Madison, ME04950. Thanks for your help. I can be reached on 203 640 9544 How quickly can you ship a qt to my refinisher in Skowhegan, Maine 474 9769

a year ago

1 Answer

A: Hi there. I have emailed a new copy of your invoice with the tracking number in a separate email. Please let me know if you do not receive it. You can also give us a call at 800-497-0010.

a year ago

Helpful?

Q: Which product is best for year round exposed teak on boat

a year ago

1 Answer

A: Hey Peggy, This product only has the one option, which would certainly work for that.

a year ago

Helpful?

1 - 10 of 175 Questions

Next Questions